Dell G5 5590-9340

Hardware	PCI/USB ID	Working?
GPU (Intel)		Yes
GPU (Nvidia)		Yes
Wireless		Yes
Bluetooth		Yes
Audio		Yes
Touchpad		Yes
Webcam		Yes
Card reader		Yes
Ethernet		Yes

This page describes Dell G5 5590-9340 laptop.

Installation

• Disable RAID and switch to AHCI in UEFI (System Configuration → SATA Operation → AHCI).
• Disable Secure Boot to be able to install the sytem (Secure Boot → Secure Boot Enable → Disable).

Firmware

fwupd is not working with this laptop, but you can format USB drive using FAT32 filesystem and put BIOS update executable on it. Reboot, start boot menu (using F12) and select "BIOS Flash Update" menu entry. Reference

Graphics

External monitor

If you are experiencing:

• Inability to use external monitor at all (does not detected or using invalid resolution).
• Rendering slowdown which can be described as "it renders one frame per second".

To fix it make your nVidia GPU as primary:

/etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    Option "PrimaryGPU" "yes"
    ModulePath "/usr/lib/nvidia/xorg"
    ModulePath "/usr/lib/xorg/modules"
EndSection

Reference

Screen tearing with nVidia

Enable full composition pipeline:

/etc/X11/xorg.conf.d/11-nvidia-tearing.conf

Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    Option "metamodes" "nvidia-auto-select +0+0 {ForceFullCompositionPipeline=On}"
    Option "AllowIndirectGLXProtocol" "off"
    Option "TripleBuffer" "on"
EndSection

Suspend-To-RAM

Switch to deep

By default, the very inefficient s2idle suspend variant is incorrectly selected, which causes e.g. fans to stay on after suspending the notebook to RAM. The much more efficient deep variant should be selected instead by adding mem_sleep_default=deep to kernel parameters.

Reference

Long recovery times

To fix long recovery times from suspend to RAM and ucsi_ccg dmesg errors (failed to reset PPM! and PPM init failed (-110)), blacklist the i2c_nvidia_gpu module.

Reference

Keyboard

Control keyboard backlight

See Keyboard backlight.

RGB backlight

A Brazilian model with RGB backlight exists, but there are no evidences that RGB backlight is working in Linux.