dhcpd

dhcpd is the Internet Systems Consortium DHCP Server. It is useful for instance on a machine acting as a router on a LAN.

Note: dhcpd (DHCP (server) daemon) is not the same as dhcpcd (DHCP client daemon).

Installation

Install the dhcp package.

Usage

dhcpd includes two unit files dhcpd4.service and dhcpd6.service, which can be used to control the daemon. They start the daemon on all network interfaces for IPv4 and IPv6 respectively. See #Listening on only one interface for an alternative.

Configuration

Assign a static IPv4 address to the interface you want to use (in our examples we will use eth0). The first 3 bytes of this address cannot be exactly the same as those of another interface.

# ip link set up dev eth0
# ip addr add 139.96.30.100/24 dev eth0 # arbitrary address

Tip: Usually, one of the next three subnets is used for private networks, which are specially reserved and will not conflict with any host in the Internet:

192.168/16 (subnet 192.168.0.0, netmask 255.255.0.0)
172.16/12 (subnet 172.16.0.0, netmask 255.240.0.0)
10/8 (for large networks; subnet 10.0.0.0, netmask 255.0.0.0)

See also RFC 1918.

To have your static ip assigned at boot, see Network configuration#Static IP address.

The default dhcpd.conf contains many uncommented examples, so relocate it:

# cp /etc/dhcpd.conf /etc/dhcpd.conf.example

The minimal configuration file may look like:

/etc/dhcpd.conf

option domain-name-servers 8.8.8.8, 8.8.4.4;
option subnet-mask 255.255.255.0;
option routers 139.96.30.100;
subnet 139.96.30.0 netmask 255.255.255.0 {
  range 139.96.30.150 139.96.30.250;
}

If you need to provide a fixed IP address for a single specific device, you can define host blocks:

/etc/dhcpd.conf

option domain-name-servers 8.8.8.8, 8.8.4.4;
option subnet-mask 255.255.255.0;
option routers 139.96.30.100;
subnet 139.96.30.0 netmask 255.255.255.0 {
  range 139.96.30.150 139.96.30.250;
}
host macbookpro{
  hardware ethernet 70:56:81:22:33:44;
  fixed-address 139.96.30.199;
}

domain-name-servers option contains addresses of DNS servers which are supplied to clients. In our example we are using Google's public DNS servers. If you know a local DNS server (for example, provided by your ISP), you should consider using it. If you have configured your own DNS on a local machine, then use its address in your subnet (e. g. 139.96.30.100 in our example).

subnet-mask and routers defines a subnet mask and a list of available routers on the subnet. In most cases for small networks you can use 255.255.255.0 as a mask and specify an IP address of the machine on which you are configuring DHCP server as a router.

subnet blocks defines options for separate subnets, which are mapped to the network interfaces on which dhcpd is running. In our example this is one subnet 139.96.30.0/24 for single interface eth0, for which we defined the range of available IP addresses. Addresses from this range will be assigned to the connecting clients.

Listening on only one interface

If your computer is already part of one or several networks, it could be a problem if your computer starts giving ip addresses to machines from the other networks. It can be done by either configuring dhcpd or starting it as a daemon with systemctl.

Configuring dhcpd

In order to exclude an interface, you must create an empty declaration for the subnet that will be configured on that interface.

This is done by editing the configuration file (for example):

/etc/dhcpd.conf

# No DHCP service in DMZ network (192.168.2.0/24)
subnet 192.168.2.0 netmask 255.255.255.0 {
}

Service file

There is no service files provided by default to use dhcpd only on one interface so you need to create one. Start by copying the existing service:

# cp /usr/lib/systemd/system/dhcpd4.service /etc/systemd/system/[email protected]

Then edit the ExecStart line to include the interface:

/etc/systemd/system/[email protected]

...
[Service]
...
ExecStart=/usr/bin/dhcpd -4 -q -cf /etc/dhcpd.conf -pf /run/dhcpd4/dhcpd.pid %I
...

This is a template unit, which binds it to a particular interface, for example dhcpd4@eth0.service where eth0 is an interface shown with ip link.

Use for PXE

PXE Configuration is done with the following two options:

/etc/dhcpd.conf

next-server 192.168.0.2;
filename "/pxelinux.0";

This section can either be in an entire subnet or just in a host definition. next-server is the IP of the TFTP Server, and filename is the filename of the image to boot. For more information see PXE.