Lenovo ThinkPad P15s

From ArchWiki

Tango-edit-clear.pngThis article or section does not follow the Laptop page guidelines.Tango-edit-clear.png

Reason: Stub (Discuss in Talk:Lenovo ThinkPad P15s)
Hardware PCI/USB ID Working?
GPU (Intel) Yes
GPU (Nvidia) Yes
Wireless Yes
Audio Yes
Touchpad Yes
Webcam Yes
Card reader Yes
Bluetooth Yes
Thunderbolt Yes
Fingerprint reader Yes

Related articles

The Thinkpad P15s is a thin-and-light 15.6" workstation laptop from Lenovo's 2020 ThinkPad P lineup.

This page specifically concerns the specifics of running Arch Linux on this laptop. See Laptop for generic laptop-related information, or ThinkPad for other ThinkPad laptops.

Hardware

Thunderbolt 3

To use Thunderbolt 3, ensure you are on the latest BIOS firmware (doing the following steps on older BIOSes may brick your device):

1. Go into BIOS

2. Enable BIOS Assist mode: (Thunderbolt 3 -> Enable BIOS assist mode) *Ensure you are on the latest BIOS!*

NVIDIA

Prime features

The NVIDIA driver now supports PRIME Offloading. Following this guide you can try out this new mode.

Power Management

To get the best power options the graphics card may be configured to use low power mode by following the guide here

Optimus manager

Currently, one of the easiest solutions for this laptop is to use optimus-manager with the hybrid backend. This requires the most up to date nvidia and xorg-server packages.

This allows easy switching between the PRIME offloading feature above, and a mode where external display ports (HDMI and USB-C) work.

Steps to setup after a fresh install:

  • Install nvidia proprietary driver 'prime', not bumblebee.
  • Reboot.
  • Install optimus-managerAUR.
  • Reboot.
  • optimus-manager --switch nvidia # this will restart your X session, but not make the change persistent.
  • lspci -k should say: Kernel driver in use: nvidia.
  • xrandr should list HDMI output - try to configure screen, should work.
  • nvidia-settings should work.
  • optimus-manager --set-startup nvidia makes it persistent.
  • Check: reboot, external display should still work.

Audio

This laptop requires firmware in order for the soundcard to work. See Advanced Linux Sound Architecture#ALSA firmware.

Fingerprint

The 1.90.1 version of fprint supports this device.

Webcam

The webcam in this laptop is capable of "Windows Hello" which has a Linux version called Howdy. The device you should use to configure howdy on this laptop is /dev/video0. It is possible that Howdy will only use the RGB camera, in this case some additional configuration and software is required. Follow this guide on installing chicony-ir-toggle and setting it up as a service. Or you can just install chicony-ir-toggle-gitAUR, which automatically helps you enable the IR camera after booting the system and waking up from sleep. Before installing chicony-ir-toggle-gitAUR, make sure you change the local variables in prepare() in PKGBUILD to match your own IR camera. In this case try changing the video device to /dev/video2 in the howdy config sudo howdy config, if everything has worked correctly when running sudo howdy test the IR Camera should have a very faint red light. This will indicate that the camera is functioning and Howdy is using the IR camera correctly.

Keyboard

Backlight

If you would like to enable the keyboard backlight, run: 

echo 2 | tee /sys/class/leds/tpacpi::kbd_backlight/brightness

The "2" represents the brightness and can be any value between 0 and 2 (inclusive) for the laptop. For example, to turn off the keyboard backlight, you would run: 

echo 0 | tee /sys/class/leds/tpacpi::kbd_backlight/brightness

Touchpad

The touchpad works out-of-the-box with libinput. However, it will be very insensitive.

Make sure to not install xf86-input-synaptics - this driver is deprecated, lacks all features mentioned below, but is still installed by default with the xorg-drivers group.

You can check which input driver Xorg is using for your touchpad with: 

grep 'Using input driver' /var/log/Xorg.0.log | grep 'SynPS/2 Synaptics TouchPad'
# Expected output: [   248.282] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'

You can explicitly chose an input driver by placing an Xorg configuration snippet like the following in /etc/X11/xorg.conf.d/99-synaptics.conf: 

Section "InputClass"
       Identifier "touchpad catchall"
       MatchIsTouchpad "on"
       Driver "libinput"
EndSection

Acceleration

You can adjust acceleration using the command: 

xinput set-prop 'SynPS/2 Synaptics TouchPad' 'libinput Accel Speed' 0.5

Two-Finger Right Click

Additionally, if you wish to disable right-clicking so that you use two finger click as your right click, run: 

xinput set-prop 'SynPS/2 Synaptics TouchPad' 'libinput Click Method Enabled' 0 1

Tap Clicking

If you would like for a tap on the touchpad to be registered as a click, use: 

xinput set-prop 'SynPS/2 Synaptics TouchPad' 'libinput Tapping Enabled' 1

Software

Throttling fix

CPU throttling on the P15s is a known issue but can be easily fixed with undervolting by 100mV.

There are a few ways to fix this. You should only use one of the following as they both attempt to undervolt.

Throttled

To fix this install throttled, then run 

systemctl enable --now lenovo_fix.service

Note that on kernels 5.9 and newer, the msr.allow_writes=on kernel parameter is required to prevent error messages, for example: 

/etc/default/grub
GRUB_CMDLINE_LINUX="msr.allow_writes=on"

CPU undervolting

Undervolting the CPU/Intel GPU works well with intel-undervolt.