Logitech Racing Wheel

This article describes how to set up a Logitech racing wheel, such as a Formula Force GP or a G27/G29 racing wheel, with Arch Linux.

Installing

Identifying

When the wheel is plugged in, the following commands can be used to identify the wheel:

# dmesg

usb 5-2: new low speed USB device using uhci_hcd and address 6

$ lsusb

Bus 005 Device 006: ID 046d:c293 Logitech, Inc. WingMan Formula Force GP

Checking input device

$ cat /proc/bus/input/devices

I: Bus=0003 Vendor=046d Product=c293 Version=0100
N: Name="Logitech Inc. WingMan Formula Force GP"
P: Phys=usb-0000:00:1a.2-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input30
U: Uniq=
H: Handlers=event15 js0 
B: EV=20001b
B: KEY=3f 0 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
B: FF=1 40000 0 0

If you do not see your Logitech listed as an input device, you need to install usb_modeswitch package. Please memorize the Handlers, here event15 and js0, as these will be necessary to call the tools for testing and configuring the wheel.

Testing

For testing the wheel there are multiple tools that can be accessed via the command-line. One common tool is jstest which can be installed via the joyutils or the linuxconsole packages. An alternative is evtest which can be installed via the evtest package. A graphical version of jstest is available in the AUR as jstest-gtk-git^AUR.

To test the wheel with jstest simply call it with the device handler (in this case with a G29 wheel and js0):

$ jstest /dev/input/js0

Driver version is 2.1.0.
Joystick (Logitech G29 Driving Force Racing Wheel) has 6 axes (X, Y, Z, Rz, Hat0X, Hat0Y)
and 25 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn, BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4, BaseBtn5, BaseBtn6, ?, ?, ?, BtnDead, (null), (null), (null), (null), (null), (null), (null), (null), (null)).
Testing ... (interrupt to exit)
Axes:  0:  -923  1: 32767  2: 32767  3: 32767  4:     0  5:     0 Buttons:  0:off  1:off  2:off  3:off  4:off  5:off  6:off  7:off  8:off  9:off 10:off 11:off 12:off 13:off 14:off 15:off 16:off 17:off 18:off 19:off 20:off 21:off 22:off 23:off 24:off

Whenever the input is changed, jstest will print the full state of the device. In case that only events should be displayed, --event can be added as flag.

When using evtest for testing, instead of the js0 as device handler eventX is needed, which in this case is event15 for a Formula Force GP wheel. evtest then shows the events coming from the wheel:

$ evtest /dev/input/event15

Input driver version is 1.0.0
Input device ID: bus 0x3 vendor 0x46d product 0xc293 version 0x100
Input device name: "Logitech Inc. WingMan Formula Force GP"
Supported events:
 Event type 0 (Reset)
   Event code 0 (Reset)
   Event code 1 (Key)
   Event code 3 (Absolute)
   Event code 4 (?)
   Event code 21 (ForceFeedback)
 Event type 1 (Key)
   Event code 288 (Trigger)
   Event code 289 (ThumbBtn)
   Event code 290 (ThumbBtn2)
   Event code 291 (TopBtn)
   Event code 292 (TopBtn2)
   Event code 293 (PinkieBtn)
 Event type 3 (Absolute)
   Event code 0 (X)
     Value    438
     Min        0
     Max     1023
     Fuzz       3
     Flat      63
   Event code 1 (Y)
     Value    124
     Min        0
     Max      255
     Flat      15
 Event type 4 (?)
   Event code 4 (?)
 Event type 21 (ForceFeedback)
   Event code 82 (?)
   Event code 96 (?)
Testing ... (interrupt to exit)
Event: time 1295173625.476950, type 3 (Absolute), code 0 (X), value 439
Event: time 1295173625.476983, type 0 (Reset), code 0 (Reset), value 0
Event: time 1295173625.484827, type 3 (Absolute), code 0 (X), value 428

ffcfstress can be used to test the force feedback. The wheel should start to oscillate:

# ffcfstress -d /dev/input/event15

         position                   center                     force
 <-----------|****+------> <-----------|*******----> <-----------|**+-------->^C

Configuration

Logitech wheels can be configured via the oversteer tool from the oversteer^AUR package. For general gamepad or joystick settings that may also apply to Logitech wheels, please refer to the Gamepad wiki page.

As of version 0.6.0, oversteer contains compatibility modes for the following wheels:

Driving Force / Formula EX
Driving Force Pro
Driving Force GT
G25 Racing Wheel
G27 Racing Wheel
G29 Racing Wheel

Besides testing the wheel, oversteer allows to configure the following aspects of the wheels:

Steering hardware lock (in degrees)
Combining pedals into one axis
Global force feedback strength
Manual auto-center force

Additional settings might be enabled by installing the new-lg4ff-dkms-git^AUR device driver. Especially the steering hardware lock is useful in certain racing games such as F1 2017 and Dirt Rally to allow for a more realistic steering experience by setting the hardware lock angle to the value of the actual vehicle (e.g. 360 for F1 cars and 540 for modern rally cars).

Games

Flatout 2

The Wheel works without any wine configuration in flatout2. Just the following in-game configuration is needed:

Force Feedback: On
Force level: 100%
Sensitivity: 100%
Deadzone: 0%
Controller: Logitech Inc...

Throttle: Y-Axis left
Brake: Y-Axis right
Steer left: X-axis left
Steer right: X-axis right