PCI passthrough via OVMF
The Open Virtual Machine Firmware (OVMF) is a project to enable UEFI support for virtual machines. Starting with Linux 3.9 and recent versions of QEMU, it is now possible to passthrough a graphics card, offering the virtual machine native graphics performance which is useful for graphic-intensive tasks.
Provided you have a desktop computer with a spare GPU you can dedicate to the host (be it an integrated GPU or an old OEM card, the brands do not even need to match) and that your hardware supports it (see #Prerequisites), it is possible to have a virtual machine of any OS with its own dedicated GPU and near-native performance. For more information on techniques see the background presentation (pdf).
Prerequisites
A VGA Passthrough relies on a number of technologies that are not ubiquitous as of today and might not be available on your hardware. You will not be able to do this on your machine unless the following requirements are met :
- Your CPU must support hardware virtualization (for kvm) and IOMMU (for the passthrough itself)
- List of compatible Intel CPUs (Intel VT-x and Intel VT-d)
- All AMD CPUs from the Bulldozer generation and up (including Zen) should be compatible.
- Your motherboard must also support IOMMU
- Both the chipset and the BIOS must support it. It is not always easy to tell at a glance whether or not this is the case, but there is a fairly comprehensive list on the matter on the Xen wiki as well as Wikipedia:List of IOMMU-supporting hardware.
- Your guest GPU ROM must support UEFI.
- If you can find any ROM in this list that applies to your specific GPU and is said to support UEFI, you are generally in the clear. All GPUs from 2012 and later should support this, as Microsoft made UEFI a requirement for devices to be marketed as compatible with Windows 8.
You will probably want to have a spare monitor or one with multiple input ports connected to different GPUs (the passthrough GPU will not display anything if there is no screen plugged in and using a VNC or Spice connection will not help your performance), as well as a mouse and a keyboard you can pass to your virtual machine. If anything goes wrong, you will at least have a way to control your host machine this way.
Setting up IOMMU
- IOMMU is a generic name for Intel VT-d and AMD-Vi.
- VT-d stands for Intel Virtualization Technology for Directed I/O and should not be confused with VT-x Intel Virtualization Technology. VT-x allows one hardware platform to function as multiple “virtual” platforms while VT-d improves security and reliability of the systems and also improves performance of I/O devices in virtualized environments.
Using IOMMU opens to features like PCI passthrough and memory protection from faulty or malicious devices, see Wikipedia:Input-output memory management unit#Advantages and Memory Management (computer programming): Could you explain IOMMU in plain English?.
Enabling IOMMU
Ensure that AMD-Vi/Intel VT-d is supported by the CPU and enabled in the BIOS settings. Both normally show up alongside other CPU features (meaning they could be in an overclocking-related menu) either with their actual names ("VT-d" or "AMD-Vi") or in more ambiguous terms such as "Virtualization technology", which may or may not be explained in the manual.
Manually enable IOMMU support by setting the correct kernel parameter depending on the type of CPU in use:
- For Intel CPUs (VT-d) set
intel_iommu=on. Since the kernel config option CONFIG_INTEL_IOMMU_DEFAULT_ON is not set in linux. - For AMD CPUs (AMD-Vi), it is on if kernel detects IOMMU hardware support from BIOS.
You should also append the iommu=pt parameter. This will prevent Linux from touching devices which cannot be passed through.
After rebooting, check dmesg to confirm that IOMMU has been correctly enabled:
# dmesg | grep -i -e DMAR -e IOMMU
[ 0.000000] ACPI: DMAR 0x00000000BDCB1CB0 0000B8 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] Intel-IOMMU: enabled [ 0.028879] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.028883] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.028950] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.536212] DMAR: No ATSR found [ 0.536229] IOMMU 0 0xfed90000: using Queued invalidation [ 0.536230] IOMMU 1 0xfed91000: using Queued invalidation [ 0.536231] IOMMU: Setting RMRR: [ 0.536241] IOMMU: Setting identity map for device 0000:00:02.0 [0xbf000000 - 0xcf1fffff] [ 0.537490] IOMMU: Setting identity map for device 0000:00:14.0 [0xbdea8000 - 0xbdeb6fff] [ 0.537512] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbdea8000 - 0xbdeb6fff] [ 0.537530] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbdea8000 - 0xbdeb6fff] [ 0.537543] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.537549] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 2.182790] [drm] DMAR active, disabling use of stolen memory
Ensuring that the groups are valid
The following script should allow you to see how your various PCI devices are mapped to IOMMU groups. If it does not return anything, you either have not enabled IOMMU support properly or your hardware does not support it.
#!/bin/bash
shopt -s nullglob
for g in $(find /sys/kernel/iommu_groups/* -maxdepth 0 -type d | sort -V); do
echo "IOMMU Group ${g##*/}:"
for d in $g/devices/*; do
echo -e "\t$(lspci -nns ${d##*/})"
done;
done;
Example output:
IOMMU Group 1: 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) IOMMU Group 2: 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:0e31] (rev 04) IOMMU Group 4: 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:0e2d] (rev 04) IOMMU Group 10: 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:0e26] (rev 04) IOMMU Group 13: 06:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) 06:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1)
An IOMMU group is the smallest set of physical devices that can be passed to a virtual machine. For instance, in the example above, both the GPU in 06:00.0 and its audio controller in 6:00.1 belong to IOMMU group 13 and can only be passed together. The frontal USB controller, however, has its own group (group 2) which is separate from both the USB expansion controller (group 10) and the rear USB controller (group 4), meaning that any of them could be passed to a virtual machine without affecting the others.
Gotchas
Plugging your guest GPU in an unisolated CPU-based PCIe slot
Not all PCI-E slots are the same. Most motherboards have PCIe slots provided by both the CPU and the PCH. Depending on your CPU, it is possible that your processor-based PCIe slot does not support isolation properly, in which case the PCI slot itself will appear to be grouped with the device that is connected to it.
IOMMU Group 1: 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750] (rev a2) 01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
This is fine so long as only your guest GPU is included in here, such as above. Depending on what is plugged in to your other PCIe slots and whether they are allocated to your CPU or your PCH, you may find yourself with additional devices within the same group, which would force you to pass those as well. If you are ok with passing everything that is in there to your virtual machine, you are free to continue. Otherwise, you will either need to try and plug your GPU in your other PCIe slots (if you have any) and see if those provide isolation from the rest or to install the ACS override patch, which comes with its own drawbacks. See #Bypassing the IOMMU groups (ACS override patch) for more information.
Isolating the GPU
In order to assign a device to a virtual machine, this device and all those sharing the same IOMMU group must have their driver replaced by a stub driver or a VFIO driver in order to prevent the host machine from interacting with them. In the case of most devices, this can be done on the fly right before the virtual machine starts.
However, due to their size and complexity, GPU drivers do not tend to support dynamic rebinding very well, so you cannot just have some GPU you use on the host be transparently passed to a virtual machine without having both drivers conflict with each other. Because of this, it is generally advised to bind those placeholder drivers manually before starting the virtual machine, in order to stop other drivers from attempting to claim it.
The following section details how to configure a GPU so those placeholder drivers are bound early during the boot process, which makes said device inactive until a virtual machine claims it or the driver is switched back. This is the preferred method, considering it has less caveats than switching drivers once the system is fully online.
Starting with Linux 4.1, the kernel includes vfio-pci. This is a VFIO driver, meaning it fulfills the same role as pci-stub did, but it can also control devices to an extent, such as by switching them into their D3 state when they are not in use.
Binding vfio-pci via device ID
Vfio-pci normally targets PCI devices by ID, meaning you only need to specify the IDs of the devices you intend to passthrough. For the following IOMMU group, you would want to bind vfio-pci with 10de:13c2 and 10de:0fbb, which will be used as example values for the rest of this section.
IOMMU Group 13: 06:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) 06:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1)}}
- You cannot specify which device to isolate using vendor-device ID pairs if the host GPU and the guest GPU share the same pair (i.e : if both are the same model). If this is your case, read #Using identical guest and host GPUs instead.
- If, as noted in #Plugging your guest GPU in an unisolated CPU-based PCIe slot, your pci root port is part of your IOMMU group, you must not pass its ID to
vfio-pci, as it needs to remain attached to the host to function properly. Any other device within that group, however, should be left forvfio-pcito bind with. - Binding the audio device (
10de:0fbbin above's example) is optional. Libvirt is able to unbind it from thesnd_hda_inteldriver on its own.
Two methods exist for providing the device IDs. Specifying them via kernel parameters has the advantage of being able to easily edit, remove, or undo any breaking changes via your boot loader:
vfio-pci.ids=10de:13c2,10de:0fbb
Alternatively, the IDs may be added to a modprobe conf file. Since these conf files are embedded in the initramfs image, any changes require regenerating a new image each time:
/etc/modprobe.d/vfio.conf
options vfio-pci ids=10de:13c2,10de:0fbb
Loading vfio-pci early
mkinitcpio
Since Arch's linux has vfio-pci built as a module, we need to force it to load early before the graphics drivers have a chance to bind to the card. To ensure that, add vfio_pci, vfio, vfio_iommu_type1, and vfio_virqfd to mkinitcpio:
/etc/mkinitcpio.conf
MODULES=(... vfio_pci vfio vfio_iommu_type1 vfio_virqfd ...)
- If you also have another driver loaded this way for early modesetting (such as
nouveau,radeon,amdgpu,i915, etc.), all of the aforementioned VFIO modules must precede it. - If you are modesetting the
nvidiadriver, thevfio-pci.idsmust be embedded in the initramfs image. If given via kernel arguments, they will be read too late to take effect. Follow the instructions in #Binding vfio-pci via device ID for adding the ids to a modprobe conf file.
Also, ensure that the modconf hook is included in the HOOKS list of mkinitcpio.conf:
/etc/mkinitcpio.conf
HOOKS=(... modconf ...)
Since new modules have been added to the initramfs configuration, you must regenerate the initramfs.
booster
Similar to mkinitcpio you need to specify modules to load early:
/etc/booster.yaml
modules_force_load: vfio_pci,vfio,vfio_iommu_type1,vfio_virqfd
and then regenerate the initramfs.
dracut
dracut's early loading mechanism is configured via kernel parameters. To load vfio-pci early, add both the device ids and the following line to your kernel parameters:
rd.driver.pre=vfio_pci
We also need to add all the vfio drivers to the initramfs. Add the following file to /etc/dracut.conf.d:
10-vfio.conf
add_drivers+=" vfio_pci vfio vfio_iommu_type1 vfio_virqfd "
As with mkinitcpio, you must regenerate the initramfs. See dracut for more details.
Verifying that the configuration worked
Reboot and verify that vfio-pci has loaded properly and that it is now bound to the right devices.
# dmesg | grep -i vfio
[ 0.329224] VFIO - User Level meta-driver version: 0.3 [ 0.341372] vfio_pci: add [10de:13c2[ffff:ffff]] class 0x000000/00000000 [ 0.354704] vfio_pci: add [10de:0fbb[ffff:ffff]] class 0x000000/00000000 [ 2.061326] vfio-pci 0000:06:00.0: enabling device (0100 -> 0103)
It is not necessary for all devices (or even expected device) from vfio.conf to be in dmesg output.
Even if a device does not appear, it might still be visible and usable in the guest virtual machine.
$ lspci -nnk -d 10de:13c2
06:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) Kernel driver in use: vfio-pci Kernel modules: nouveau nvidia
$ lspci -nnk -d 10de:0fbb
06:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1) Kernel driver in use: vfio-pci Kernel modules: snd_hda_intel
Setting up an OVMF-based guest virtual machine
OVMF is an open-source UEFI firmware for QEMU virtual machines. While it is possible to use SeaBIOS to get similar results to an actual PCI passthrough, the setup process is different and it is generally preferable to use the EFI method if your hardware supports it.
Configuring libvirt
Libvirt is a wrapper for a number of virtualization utilities that greatly simplifies the configuration and deployment process of virtual machines. In the case of KVM and QEMU, the frontend it provides allows us to avoid dealing with the permissions for QEMU and make it easier to add and remove various devices on a live virtual machine. Its status as a wrapper, however, means that it might not always support all of the latest qemu features, which could end up requiring the use of a wrapper script to provide some extra arguments to QEMU.
Install qemu-desktop, libvirt, edk2-ovmf, and virt-manager. For the default network connection, iptables-nft and dnsmasq are required.
You can now enable and start libvirtd.service and its logging component virtlogd.socket.
You may also need to activate the default libvirt network:
# virsh net-autostart default # virsh net-start default
Setting up the guest OS
The process of setting up a virtual machine using virt-manager is mostly self-explanatory, as most of the process comes with fairly comprehensive on-screen instructions.
However, you should pay special attention to the following steps:
- When the virtual machine creation wizard asks you to name your virtual machine (final step before clicking "Finish"), check the "Customize before install" checkbox.
- In the "Overview" section, set your firmware to "UEFI". If the option is grayed out, make sure that:
- Your hypervisor is running as a system session and not a user session. This can be verified by clicking, then hovering over the session in virt-manager. If you are accidentally running it as a user session, you must open a new connection by clicking "File" > "Add Connection..", then select the option from the drop-down menu station "QEMU/KVM" and not "QEMU/KVM user session".
- In the "CPUs" section, change your CPU model to "host-passthrough". If it is not in the list, you will have to either type it by hand or by using
virt-xml vmname --edit --cpu host-passthrough. This will ensure that your CPU is detected properly, since it causes libvirt to expose your CPU capabilities exactly as they are instead of only those it recognizes (which is the preferred default behavior to make CPU behavior easier to reproduce). Without it, some applications may complain about your CPU being of an unknown model. - If you want to minimize IO overhead, it is easier to setup #Virtio disk before installing
The rest of the installation process will take place as normal using a standard QXL video adapter running in a window. At this point, there is no need to install additional drivers for the rest of the virtual devices, since most of them will be removed later on. Once the guest OS is done installing, simply turn off the virtual machine. It is possible you will be dropped into the UEFI menu instead of starting the installation upon powering your virtual machine for the first time. Sometimes the correct ISO file was not automatically detected and you will need to manually specify the drive to boot. By typing exit and navigating to "boot manager" you will enter a menu that allows you to choose between devices.
Attaching the PCI devices
With the installation done, it is now possible to edit the hardware details in libvirt and remove virtual integration devices, such as the spice channel and virtual display, the QXL video adapter, the emulated mouse and keyboard and the USB tablet device. For example, remove the following sections from your XML file:
<channel type="spicevmc">
...
</channel>
<input type="tablet" bus="usb">
...
</input>
<input type="mouse" bus="ps2"/>
<input type="keyboard" bus="ps2"/>
<graphics type="spice" autoport="yes">
...
</graphics>
<video>
<model type="qxl" .../>
...
</video>
Since that leaves you with no input devices, you may want to bind a few USB host devices to your virtual machine as well, but remember to leave at least one mouse and/or keyboard assigned to your host in case something goes wrong with the guest. This may be done by using Add Hardware > USB Host Device.
At this point, it also becomes possible to attach the PCI device that was isolated earlier; simply click on "Add Hardware" and select the PCI Host Devices you want to passthrough. If everything went well, the screen plugged into your GPU should show the OVMF splash screen and your virtual machine should start up normally. From there, you can setup the drivers for the rest of your virtual machine.
Video card driver virtualisation detection
Video card drivers by AMD incorporate very basic virtual machine detection targeting Hyper-V extensions. Should this detection mechanism trigger, the drivers will refuse to run, resulting in a black screen.
If this is the case, it is required to modify the reported Hyper-V vendor ID:
$ virsh edit vmname
...
<features>
...
<hyperv>
...
<vendor_id state='on' value='randomid'/>
...
</hyperv>
...
</features>
...
Nvidia guest drivers prior to version 465 exhibited a similar behaviour which resulted in a generic error 43 in the card's device manager status. Systems using these older drivers therefore also need the above modification. In addition, they also require hiding the KVM CPU leaf:
$ virsh edit vmname
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
...
</features>
...
Note that the above steps do not equate 'hiding' the virtual machine from Windows or any drivers/programs running in the virtual machine. Also, various other issues not related to any detection mechanism referred to here can also trigger error 43.
Passing keyboard/mouse via Evdev
If you do not have a spare mouse or keyboard to dedicate to your guest, and you do not want to suffer from the video overhead of Spice, you can setup evdev to share them between your Linux host and your virtual machine.
First, find your keyboard and mouse devices in /dev/input/by-id/. Only devices with event in their name are valid. You may find multiple devices associated to your mouse or keyboard, so try cat /dev/input/by-id/device_id and either hit some keys on the keyboard or wiggle your mouse to see if input comes through, if so you have got the right device. Now add those devices to your configuration:
$ virsh edit vmname
...
<devices>
...
<input type='evdev'>
<source dev='/dev/input/by-id/MOUSE_NAME'/>
</input>
<input type='evdev'>
<source dev='/dev/input/by-id/KEYBOARD_NAME' grab='all' repeat='on'/>
</input>
...
</devices>
Replace MOUSE_NAME and KEYBOARD_NAME with your device path. Now you can startup the guest OS and test swapping control of your mouse and keyboard between the host and guest by pressing both the left and right control keys at the same time.
You may also consider switching from PS/2 to Virtio inputs in your configurations. Add these two devices:
$ virsh edit vmname
... <input type='mouse' bus='virtio'/> <input type='keyboard' bus='virtio'/> ...
The virtio input devices will not actually be used until the guest drivers are installed. QEMU will continue to send key events to the PS2 devices until it detects the virtio input driver initialization. Note that the PS2 devices cannot be removed as they are an internal function of the emulated Q35/440FX chipsets.
Gotchas
Using a non-EFI image on an OVMF-based virtual machine
The OVMF firmware does not support booting off non-EFI mediums. If the installation process drops you in a UEFI shell right after booting, you may have an invalid EFI boot media. Try using an alternate Linux/Windows image to determine if you have an invalid media.
Performance tuning
Most use cases for PCI passthroughs relate to performance-intensive domains such as video games and GPU-accelerated tasks. While a PCI passthrough on its own is a step towards reaching native performance, there are still a few ajustments on the host and guest to get the most out of your virtual machine.
CPU pinning
The default behavior for KVM guests is to run operations coming from the guest as a number of threads representing virtual processors. Those threads are managed by the Linux scheduler like any other thread and are dispatched to any available CPU cores based on niceness and priority queues. As such, the local CPU cache benefits (L1/L2/L3) are lost each time the host scheduler reschedules the virtual CPU thread on a different physical CPU. This can noticeably harm performance on the guest. CPU pinning aims to resolve this by limiting which physical CPUs the virtual CPUs are allowed to run on. The ideal setup is a one to one mapping such that the virtual CPU cores match physical CPU cores while taking hyperthreading/SMT into account.
In addition, in some modern CPUs, groups of cores often share a common L3 cache. In such cases, care should be taken to pin exactly those physical cores that share a particular L3. Failing to do so might lead to cache evictions which could result in microstutters.
CPU topology
Most modern CPUs support hardware multitasking, also known as hyper-threading on Intel CPUs or SMT on AMD CPUs. Hyper-threading/SMT is simply a very efficient way of running two threads on one CPU core at any given time. You will want to take into consideration that the CPU pinning you choose will greatly depend on what you do with your host while your virtual machine is running.
To find the topology for your CPU run lscpu -e:
lscpu -e on a 6c/12t Ryzen 5 1600:
CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ 0 0 0 0 0:0:0:0 yes 3800.0000 1550.0000 1 0 0 0 0:0:0:0 yes 3800.0000 1550.0000 2 0 0 1 1:1:1:0 yes 3800.0000 1550.0000 3 0 0 1 1:1:1:0 yes 3800.0000 1550.0000 4 0 0 2 2:2:2:0 yes 3800.0000 1550.0000 5 0 0 2 2:2:2:0 yes 3800.0000 1550.0000 6 0 0 3 3:3:3:1 yes 3800.0000 1550.0000 7 0 0 3 3:3:3:1 yes 3800.0000 1550.0000 8 0 0 4 4:4:4:1 yes 3800.0000 1550.0000 9 0 0 4 4:4:4:1 yes 3800.0000 1550.0000 10 0 0 5 5:5:5:1 yes 3800.0000 1550.0000 11 0 0 5 5:5:5:1 yes 3800.0000 1550.0000
Considering the L3 mapping, it is recommended to pin and isolate CPUs 6–11. Pinning and isolating fewer than these (e.g. 8–11) would result in the host system making use of the L3 cache in core 6 and 7 which would eventually lead to cache evictions and therefore bad performance.
lscpu -e on a 6c/12t Intel 8700k:
CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ 0 0 0 0 0:0:0:0 yes 4600.0000 800.0000 1 0 0 1 1:1:1:0 yes 4600.0000 800.0000 2 0 0 2 2:2:2:0 yes 4600.0000 800.0000 3 0 0 3 3:3:3:0 yes 4600.0000 800.0000 4 0 0 4 4:4:4:0 yes 4600.0000 800.0000 5 0 0 5 5:5:5:0 yes 4600.0000 800.0000 6 0 0 0 0:0:0:0 yes 4600.0000 800.0000 7 0 0 1 1:1:1:0 yes 4600.0000 800.0000 8 0 0 2 2:2:2:0 yes 4600.0000 800.0000 9 0 0 3 3:3:3:0 yes 4600.0000 800.0000 10 0 0 4 4:4:4:0 yes 4600.0000 800.0000 11 0 0 5 5:5:5:0 yes 4600.0000 800.0000
Since all cores are connected to the same L3 in this example, it does not matter much how many CPUs you pin and isolate as long as you do it in the proper thread pairs. For instance, (0, 6), (1, 7), etc.
As we see above, with AMD Core 0 is sequential with CPU 0 & 1, whereas Intel places Core 0 on CPU 0 & 6.
lstopo to generate a helpful image of your CPU/Thread groupings.If you do not need all cores for the guest, it would then be preferable to leave at the very least one core for the host. Choosing which cores one to use for the host or guest should be based on the specific hardware characteristics of your CPU, however Core 0 is a good choice for the host in most cases. If any cores are reserved for the host, it is recommended to pin the emulator and iothreads, if used, to the host cores rather than the VCPUs. This may improve performance and reduce latency for the guest since those threads will not pollute the cache or contend for scheduling with the guest VCPU threads. If all cores are passed to the guest, there is no need or benefit to pinning the emulator or iothreads.
XML examples
4c/1t CPU w/o Hyperthreading Example
$ virsh edit vmname
...
<vcpu placement='static'>4</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='0'/>
<vcpupin vcpu='1' cpuset='1'/>
<vcpupin vcpu='2' cpuset='2'/>
<vcpupin vcpu='3' cpuset='3'/>
</cputune>
...
4c/2t Intel/AMD CPU example (after ComboPI AGESA bios update)
$ virsh edit vmname
...
<vcpu placement='static'>8</vcpu>
<iothreads>1</iothreads>
<cputune>
<vcpupin vcpu='0' cpuset='2'/>
<vcpupin vcpu='1' cpuset='8'/>
<vcpupin vcpu='2' cpuset='3'/>
<vcpupin vcpu='3' cpuset='9'/>
<vcpupin vcpu='4' cpuset='4'/>
<vcpupin vcpu='5' cpuset='10'/>
<vcpupin vcpu='6' cpuset='5'/>
<vcpupin vcpu='7' cpuset='11'/>
<emulatorpin cpuset='0,6'/>
<iothreadpin iothread='1' cpuset='0,6'/>
</cputune>
...
<cpu mode='host-passthrough'>
<topology sockets='1' cores='4' threads='2'/>
</cpu>
...
4c/2t AMD CPU example (Before ComboPi AGESA bios update)
$ virsh edit vmname
...
<vcpu placement='static'>8</vcpu>
<iothreads>1</iothreads>
<cputune>
<vcpupin vcpu='0' cpuset='2'/>
<vcpupin vcpu='1' cpuset='3'/>
<vcpupin vcpu='2' cpuset='4'/>
<vcpupin vcpu='3' cpuset='5'/>
<vcpupin vcpu='4' cpuset='6'/>
<vcpupin vcpu='5' cpuset='7'/>
<vcpupin vcpu='6' cpuset='8'/>
<vcpupin vcpu='7' cpuset='9'/>
<emulatorpin cpuset='0-1'/>
<iothreadpin iothread='1' cpuset='0-1'/>
</cputune>
...
<cpu mode='host-passthrough'>
<topology sockets='1' cores='4' threads='2'/>
</cpu>
...
If you do not intend to be doing any computation-heavy work on the host (or even anything at all) at the same time as you would on the virtual machine, you may want to pin your virtual machine threads across all of your cores, so that the virtual machine can fully take advantage of the spare CPU time the host has available. Be aware that pinning all physical and logical cores of your CPU could induce latency in the guest virtual machine.
Huge memory pages
When dealing with applications that require large amounts of memory, memory latency can become a problem since the more memory pages are being used, the more likely it is that this application will attempt to access information across multiple memory "pages", which is the base unit for memory allocation. Resolving the actual address of the memory page takes multiple steps, and so CPUs normally cache information on recently used memory pages to make subsequent uses on the same pages faster. Applications using large amounts of memory run into a problem where, for instance, a virtual machine uses 4 GiB of memory divided into 4 KiB pages (which is the default size for normal pages) for a total of 1.04 million pages, meaning that such cache misses can become extremely frequent and greatly increase memory latency. Huge pages exist to mitigate this issue by giving larger individual pages to those applications, increasing the odds that multiple operations will target the same page in succession.
Transparent huge pages
QEMU will use 2MiB sized transparent huge pages automatically without any explicit configuration in QEMU or Libvirt, subject to some important caveats. When using VFIO the pages are locked in at boot time and transparent huge pages are allocated up front when the virtual machine first boots. If the kernel memory is highly fragmented, or the virtual machine is using a majority of the remaining free memory, it is likely that the kernel will not have enough 2MiB pages to fully satisfy the allocation. In such a case, it silently fails by using a mix of 2MiB and 4KiB pages. Since the pages are locked in VFIO mode, the kernel will not be able to convert those 4KiB pages to huge after the virtual machine starts either. The number of available 2MiB huge pages available to THP is the same as via the #Dynamic huge pages mechanism described in the following sections.
To check how much memory THP is using globally:
$ grep AnonHugePages /proc/meminfo
AnonHugePages: 8091648 kB
To check a specific QEMU instance. QEMU's PID must be substituted in the grep command:
$ grep -P 'AnonHugePages:\s+(?!0)\d+' /proc/[PID]/smaps
AnonHugePages: 8087552 kB
In this example, the virtual machine was allocated 8388608KiB of memory, but only 8087552KiB was available via THP. The remaining 301056KiB are allocated as 4KiB pages. Aside from manually checking, there is no indication when partial allocations occur. As such, THP's effectiveness is very much dependent on the host system's memory fragmentation at the time of virtual machine startup. If this trade off is unacceptable or strict guarantees are required, #Static huge pages is recommended.
Arch kernels have THP compiled in and enabled by default with /sys/kernel/mm/transparent_hugepage/enabled set to madvise mode.
Static huge pages
While transparent huge pages should work in the vast majority of cases, they can also be allocated statically during boot. This should only be needed to make use 1 GiB hugepages on machines that support it, since transparent huge pages normally only go up to 2 MiB.
To allocate huge pages at boot, one must simply specify the desired amount on their kernel command line with hugepages=x. For instance, reserving 1024 pages with hugepages=1024 and the default size of 2048 KiB per huge page creates 2 GiB worth of memory for the virtual machine to use.
If supported by CPU page size could be set manually. 1 GiB huge page support could be verified by grep pdpe1gb /proc/cpuinfo. Setting 1 GiB huge page size via kernel parameters : default_hugepagesz=1G hugepagesz=1G hugepages=X.
Also, since static huge pages can only be used by applications that specifically request it, you must add this section in your libvirt domain configuration to allow kvm to benefit from them :
$ virsh edit vmname
... <memoryBacking> <hugepages/> </memoryBacking> ...
Dynamic huge pages
Hugepages could be allocated manually via vm.nr_overcommit_hugepages sysctl parameter.
/etc/sysctl.d/10-kvm.conf
vm.nr_hugepages = 0 vm.nr_overcommit_hugepages = num
Where num - is the number of huge pages, which default size if 2 MiB.
Pages will be automatically allocated, and freed after the virtual machine stops.
More manual way:
# echo num > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages # echo num > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
For 2 MiB and 1 GiB page size respectively. And they should be manually freed in the same way.
It is hardly recommended to drop caches, compact memory and wait a couple of seconds before starting the virtual machine, as there could be not enough free contiguous memory for required huge pages blocks. Especially after some uptime of the host system.
# echo 3 > /proc/sys/vm/drop_caches # echo 1 > /proc/sys/vm/compact_memory
Theoretically, 1 GiB pages works as 2 MiB. But practically - no guaranteed way was found to get contiguous 1 GiB memory blocks. Each consequent request of 1 GiB blocks lead to lesser and lesser dynamically allocated count.
CPU frequency governor
Depending on the way your CPU governor is configured, the virtual machine threads may not hit the CPU load thresholds for the frequency to ramp up. Indeed, KVM cannot actually change the CPU frequency on its own, which can be a problem if it does not scale up with vCPU usage as it would result in underwhelming performance. An easy way to see if it behaves correctly is to check if the frequency reported by watch lscpu goes up when running a CPU-intensive task on the guest. If you are indeed experiencing stutter and the frequency does not go up to reach its reported maximum, it may be due to cpu scaling being controlled by the host OS. In this case, try setting all cores to maximum frequency to see if this improves performance. Note that if you are using a modern intel chip with the default pstate driver, cpupower commands will be ineffective, so monitor /proc/cpuinfo to make sure your cpu is actually at max frequency.
Isolating pinned CPUs
CPU pinning by itself will not prevent other host processes from running on the pinned CPUs. Properly isolating the pinned CPUs can reduce latency in the guest virtual machine.
With isolcpus kernel parameter
In this example, let us assume you are using CPUs 4-7.
Use the kernel parameters isolcpus nohz_full to completely isolate the CPUs from the kernel. For example:
isolcpus=4-7 nohz_full=4-7
Then, run qemu-system-x86_64 with taskset and chrt:
# chrt -r 1 taskset -c 4-7 qemu-system-x86_64 ...
The chrt command will ensure that the task scheduler will round-robin distribute work (otherwise it will all stay on the first cpu). For taskset, the CPU numbers can be comma- and/or dash-separated, like "0,1,2,3" or "0-4" or "1,7-8,10" etc.
See this Internet Archive copy of a Removeddit mirror of a Reddit thread for more info. (The original thread is worthless because of deleted comments, and Removeddit not longer works.)
Dynamically isolating CPUs
The isolcpus kernel parameter will permanently reserve CPU cores, even when the guest is not running. A more flexible alternative is to dynamically isolate CPUs when starting the guest. This can be achieved with the following alternatives:
- cpuset-gitAUR (vfio-users post, blog post, example script)
- vfio-isolateAUR
- systemd
Example with systemd
In this example, we assume a host with 12 CPUs, where CPUs 2-5 and 8-11 are pinned to the guest. Then run the following to isolate the host to CPUs 0, 1, 6, and 7:
# systemctl set-property --runtime -- user.slice AllowedCPUs=0,1,6,7 # systemctl set-property --runtime -- system.slice AllowedCPUs=0,1,6,7 # systemctl set-property --runtime -- init.scope AllowedCPUs=0,1,6,7
After shutting down the guest, run the following to reallocate all 12 CPUs back to the host:
# systemctl set-property --runtime -- user.slice AllowedCPUs=0-11 # systemctl set-property --runtime -- system.slice AllowedCPUs=0-11 # systemctl set-property --runtime -- init.scope AllowedCPUs=0-11
You can use a libvirt hook to automatically run the above at startup/shutdown of the guest like so:
Create or edit /etc/libvirt/hooks/qemu with the following content.
/etc/libvirt/hooks/qemu
#!/bin/sh
command=$2
if [ "$command" = "started" ]; then
systemctl set-property --runtime -- system.slice AllowedCPUs=0,1,6,7
systemctl set-property --runtime -- user.slice AllowedCPUs=0,1,6,7
systemctl set-property --runtime -- init.scope AllowedCPUs=0,1,6,7
elif [ "$command" = "release" ]; then
systemctl set-property --runtime -- system.slice AllowedCPUs=0-11
systemctl set-property --runtime -- user.slice AllowedCPUs=0-11
systemctl set-property --runtime -- init.scope AllowedCPUs=0-11
fi
Afterwards make it executable.
Restart libvirtd.service and then start your virtual machine. If you create some heavily multithreaded load on your host now, you should see that it keeps your chosen CPUs free from load while the virtual machine can still make use of it. You should also see those CPUs automatically getting fully used by your host once you terminate the virtual machine.
More examples are contained in the following reddit threads: [1] [2] [3]
Note that this requires systemd 244 or higher, and cgroups v2, which is now enabled by default.
Improving performance on AMD CPUs
Starting with QEMU 3.1 the TOPOEXT cpuid flag is disabled by default. In order to use hyperthreading (SMT) on AMD CPUs you need to manually enable it:
<cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='4' threads='2'/> <feature policy='require' name='topoext'/> </cpu>
commit: https://git.qemu.org/?p=qemu.git;a=commit;h=7210a02c58572b2686a3a8d610c6628f87864aed
Virtio disk
The default disk types are SATA or IDE emulation out of the box. These controllers offer maximum compatibility but are not suited for efficient virtualization. Two accelerated models exist: virtio-scsi for SCSI emulation and passthrough, or virtio-blk for a more basic block device emulation.
Drivers
- Linux guests should support these out of the box on any modern kernel
- macOS has
virtio-blksupport starting in Mojave viaAppleVirtIO.kext - Windows needs the Windows virtio drivers.
virtio-scsiuses thevioscsidriver.virtio-blkuses theviostordriver - Windows can be installed directly onto these disks by selecting 'load driver' on the installer disk selection menu. The windows iso and virtio driver iso should both be attached as regular SATA/IDE cdroms during the installation process
- To switch boot disks to virtio on an existing Windows installation:
-
virtio-blk: Add a temporary disk with busvirtio, boot windows & load the driver for the disk, then shutdown and switch the boot disk disk bus tovirtio -
virtio-scsi: Add a scsi controller with modelvirtio, boot windows & load the driver for the controller, then shutdown and switch the boot disk bus toscsi(not virtio)
-
Considerations
-
virtio-scsiTRIM support is mature, all versions should support it. Traditionally,virtio-scsihas been the preferred approach for this reason -
virtio-blkTRIM support is new, this requires requires qemu 4.0+, guest linux kernel 5.0+, guest windows drivers 0.1.173+ - Thin provisioning works by enabling TRIM on a sparse image file:
discard='unmap'. Unused blocks will be freed and the disk usage will drop (works on both raw and qcow2). Actual on-disk size of a sparse image file may be checked withdu /path/to/disk.img - Thin provisioning can also work with block storage such as zfs zvols or thin lvm
- Virt queue count will influence the number of threads inside the guest kernel used for IO processing, suggest using
queues='4'or more - Native mode (
io='native') uses a single threaded model based on linux AIO, is a bit more CPU efficient but may have lower peak performance and does not allow host side caching to be used - Threaded mode (
io='threads') will spawn dozens of threads on demand as the disk is used. This is less efficient but may perform better if there are enough host cores available to run them, and allows for host side caching to be used - Modern versions of libvirt will group the dynamic worker threads created when using threaded mode in with the iothread=1 cgroup for pinning purposes. Very old versions of libvirt left these in the emulator cgroup
IO threads
An IO thread is a dedicated thread for processing disk events, rather than using the main qemu emulator loop. This should not be confused with the worker threads spawned on demand with io='threads'.
- You can only use one iothread per disk controller. The thread must be assigned to a specific controller with
iothread='X'in the<driver>tag. Furthermore, extra & unassigned iothreads will not be used and do nothing - In the case of
virtio-scsi, there is one controller for multiple scsi disks. The iothread is assigned on the controller:<controller><driver iothread='X'> - In the case of
virtio-blk, each disk has its own controller. The iothread is assigned in the driver tag under the disk itself:<disk><driver iothread='X'> - Since emulated disks incur a significant amount of CPU overhead, that can lead to vcpu stuttering under high disk load (especially high random IOPS). In this case it helps to pin the IO to different core(s) than your vcpus with
<iothreadpin>
Examples with libvirt
virtio-scsi + iothread + worker threads + host side writeback caching + full disk block device backend:
<domain>
<devices>
<disk type='block' device='disk'>
<driver name='qemu' type='raw' cache='writeback' io='threads' discard='unmap'/>
<source dev='/dev/disk/by-id/ata-Samsung_SSD_840_EVO_1TB_S1D9NSAF206396F'/>
<target dev='sda' bus='scsi'/>
</disk>
<controller type='scsi' index='0' model='virtio-scsi'>
<driver iothread='1' queues='8'/>
</controller>
virtio-blk + iothread + native aio + no host caching + raw sparse image backend:
<domain>
<devices>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='none' io='native' discard='unmap' iothread='1' queues='8'/>
<source file='/var/lib/libvirt/images/pool/win10.img'/>
<target dev='vda' bus='virtio'/>
</disk>
Creating the iothreads:
<domain> <iothreads>1</iothreads>
Pinning iothreads:
<domain>
<cputune>
<iothreadpin iothread='1' cpuset='0-1,6-7'/>
Example with virt-manager
This will create a virtio-blk device:
- Open the virtual machine preferences
- Go to
Add Hardware > Storage - Create or choose a storage file
- Select
Device Type: Disk deviceandBus type: VirtIO - Click Finish
Virtio network
The default NIC models rtl8139 or e1000 can be a bottleneck for gigabit+ speeds and have a significant amount of CPU overhead compared to virtio-net.
- Select
virtioas the model for the NIC with libvirt or use thevirtio-net-pcidevice in bare qemu - Windows needs the
NetKVMdriver from Windows virtio drivers - Virtio uses vhost-net by default for in-kernel packet processing without exiting to userspace
- Multiqueue can enabled for a further speedup with multiple connections but typically will not boost single stream speeds. For libvirt add
<driver queues='8'/>under the interface tag - Zero copy transmit may also be enabled on macvtap by setting the module parameter
vhost_net.experimental_zcopytx=1but this may actually have worse performance, see commit
Libvirt example with a bridge:
<interface type='bridge'> <mac address="52:54:00:6d:6e:2e"/> <source bridge='br0'/> <model type='virtio'/> <driver queues='8'/> </interface>
MACVTAP example with a bridge:
<interface type="direct"> <source dev="eno1" mode="vepa"/> <target dev="macvtap0"/> <model type="virtio"/> <alias name="net0"/> </interface>
Possible options for mode are 'vepa', 'bridge', 'private', and 'passthrough'. A guide with decriptions of the differences is available from redhat[4].
Replace the source /dev device with your own device address. You can get your local address with the following command:
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 30:9c:23:ac:51:d0 brd ff:ff:ff:ff:ff:ff altname enp0s31f6
Further tuning
More specialized virtual machine tuning tips are available at Red Hat's Virtualization Tuning and Optimization Guide.
Special procedures
Certain setups require specific configuration tweaks in order to work properly. If you are having problems getting your host or your virtual machine to work properly, see if your system matches one of the cases below and try adjusting your configuration accordingly.
Using identical guest and host GPUs
Due to how vfio-pci uses your vendor and device id pair to identify which device they need to bind to at boot, if you have two GPUs sharing such an ID pair you will not be able to get your passthrough driver to bind with just one of them. This sort of setup makes it necessary to use a script, so that whichever driver you are using is instead assigned by pci bus address using the driver_override mechanism.
Script variants
Passthrough all GPUs but the boot GPU
Here, we will make a script to bind vfio-pci to all GPUs but the boot gpu. Create the script /usr/local/bin/vfio-pci-override.sh:
#!/bin/sh
for i in /sys/bus/pci/devices/*/boot_vga; do
if [ $(cat "$i") -eq 0 ]; then
GPU="${i%/boot_vga}"
AUDIO="$(echo "$GPU" | sed -e "s/0$/1/")"
USB="$(echo "$GPU" | sed -e "s/0$/2/")"
echo "vfio-pci" > "$GPU/driver_override"
if [ -d "$AUDIO" ]; then
echo "vfio-pci" > "$AUDIO/driver_override"
fi
if [ -d "$USB" ]; then
echo "vfio-pci" > "$USB/driver_override"
fi
fi
done
modprobe -i vfio-pci
Passthrough selected GPU
In this case we manually specify the GPU to bind.
#!/bin/sh
DEVS="0000:03:00.0 0000:03:00.1"
if [ ! -z "$(ls -A /sys/class/iommu)" ]; then
for DEV in $DEVS; do
echo "vfio-pci" > /sys/bus/pci/devices/$DEV/driver_override
done
fi
modprobe -i vfio-pci
Passthrough IOMMU Group based of GPU
Simplifying the passthrough of other necessary devices from selected GPU(s). Things like the graphicscard's onboard Audio, USB and RGB controllers.
#!/bin/sh
DEVS="0000:03:00.0"
if [ ! -z "$(ls -A /sys/class/iommu)" ]; then
for DEV in $DEVS; do
for IOMMUDEV in $(ls /sys/bus/pci/devices/$DEV/iommu_group/devices) ; do
echo "vfio-pci" > /sys/bus/pci/devices/$IOMMUDEV/driver_override
done
done
fi
modprobe -i vfio-pci
Script installation
Edit /etc/mkinitcpio.conf:
Edit /etc/modprobe.d/vfio.conf:
- Add the following line:
install vfio-pci /usr/local/bin/vfio-pci-override.sh - Regenerate the initramfs and reboot.
Passing the boot GPU to the guest
The GPU marked as boot_vga is a special case when it comes to doing PCI passthroughs, since the BIOS needs to use it in order to display things like boot messages or the BIOS configuration menu. To do that, it makes a copy of the VGA boot ROM which can then be freely modified. This modified copy is the version the system gets to see, which the passthrough driver may reject as invalid. As such, it is generally recommended to change the boot GPU in the BIOS configuration so the host GPU is used instead or, if that is not possible, to swap the host and guest cards in the machine itself.
Using Looking Glass to stream guest screen to the host
It is possible to make a virtual machine share the monitor, and optionally a keyboard and a mouse with a help of Looking Glass.
Adding IVSHMEM Device to virtual machines
Looking glass works by creating a shared memory buffer between a host and a guest. This is a lot faster than streaming frames via localhost, but requires additional setup.
With your virtual machine turned off open the machine configuration
$ virsh edit vmname
...
<devices>
...
<shmem name='looking-glass'>
<model type='ivshmem-plain'/>
<size unit='M'>32</size>
</shmem>
</devices>
...
You should replace 32 with your own calculated value based on what resolution you are going to pass through. It can be calculated like this:
width x height x 4 x 2 = total bytes total bytes / 1024 / 1024 = total mebibytes + 10
For example, in case of 1920x1080
1920 x 1080 x 4 x 2 = 16,588,800 bytes 16,588,800 / 1024 / 1024 = 15.82 MiB + 10 = 25.82
The result must be rounded up to the nearest power of two, and since 25.82 is bigger than 16 we should choose 32.
Next create a configuration file to create the shared memory file on boot
/etc/tmpfiles.d/10-looking-glass.conf
f /dev/shm/looking-glass 0660 user kvm -
Replace user with your username.
Ask systemd-tmpfiles to create the shared memory file now without waiting to next boot
# systemd-tmpfiles --create /etc/tmpfiles.d/10-looking-glass.conf
Installing the IVSHMEM Host to Windows guest
Currently Windows would not notify users about a new IVSHMEM device, it would silently install a dummy driver. To actually enable the device you have to go into device manager and update the driver for the device under the "System Devices" node for "PCI standard RAM Controller". Download the signed driver from Red Hat.
Once the driver is installed you must download a matching looking-glass-host package that matches the client you will install from AUR, and install it on your guest. In order to run it you would also need to install Microsoft Visual C++ Redistributable from Microsoft. The recent version will automatically install a service that starts the daemon on boot. The logs of the host daemon are located at %ProgramData%\Looking Glass (host)\looking-glass-host.txt on the guest system.
Setting up the null video device
(Retrieved from: https://looking-glass.io/docs/stable/install/#spice-server)
If you would like to use Spice to give you keyboard and mouse input along with clipboard sync support, make sure you have a <graphics type='spice'> device, then:
- Find your
<video>device, and set<model type='none'/> - If you cannot find it, make sure you have a
<graphics>device, save and edit again
Getting a client
Looking glass client can be installed from AUR using looking-glassAUR or looking-glass-gitAUR packages.
You can start it once the virtual machine is set up and running
$ looking-glass-client
If you do not want to use Spice to control the guest mouse and keyboard you can disable the Spice server.
$ looking-glass-client -s
Additionally you may want to start Looking Glass Client as full screen, otherwise the image may be scaled down resulting in poor image fidelity.
$ looking-glass-client -F
Launch with the --help option for further information.
Additional information
Refer to the upstream documentation for further details.
Swap peripherals to and from the Host
Looking Glass includes a Spice client in order to control mouse movement on the Windows guest. However this may have too much latency for certain applications, such as gaming. An alternative method is passing through specific USB devices for minimal latency. This allows for switching the devices between host and guest.
First create a .xml file for the device(s) you wish to pass-through, which libvirt will use to identify the device.
~/.VFIOinput/input_1.xml
<hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x[Before Colon]'/> <product id='0x[After Colon]'/> </source> </hostdev>
Replace [Before/After Colon] with the contents of the 'lsusb' command, specific to the device you want to pass-through.
For instance my mouse is Bus 005 Device 002: ID 1532:0037 Razer USA, Ltd so I would replace vendor id with 1532, and product id with 0037.
Repeat this process for any additional USB devices you want to pass-through. If your mouse / keyboard has multiple entries in lsusb, perhaps if it is wireless, then create additional xml files for each.
Next a bash script file is needed to tell libvirt what to attach/detach the USB devices to the guest.
~/.VFIOinput/input_attach.sh
#!/bin/sh virsh attach-device [VirtualMachine-Name] [USBdevice]
Replace [VirtualMachine-Name] with the name of your virtual machine, which can be seen under virt-manager. Additionally replace [USBdevice] with the full path to the .xml file for the device you wish to pass-through. Add additional lines for more than 1 device. For example here is my script:
~/.VFIOinput/input_attach.sh
#!/bin/sh virsh attach-device win10 /home/$USER/.VFIOinput/input_mouse.xml virsh attach-device win10 /home/$USER/.VFIOinput/input_keyboard.xml
Next duplicate the script file and replace attach-device with detach-device. Ensure both scripts are executable.
This 2 script files can now be executed to attach or detach your USB devices from the host to the guest virtual machine. It is important to note that they may need to be executed as root. To run the script from the Windows virtual machine, one possibility is using PuTTY to SSH into the host, and execute the script. On Windows PuTTY comes with plink.exe which can execute singular commands over SSH before then logging out, instead of opening a SSH terminal, all in the background.
detach_devices.bat
"C:\Program Files\PuTTY\plink.exe" root@$HOST_IP -pw $ROOTPASSWORD /home/$USER/.VFIOinput/input_detach.sh
Replace $HOST_IP with the Host IP Address and $ROOTPASSWORD with the root password.
You may also want to execute the script files using key binds. On Windows one option is Autohotkey, and on the Host Xbindkeys. Because of the need to run the scripts as root, you may also need to use Polkit or Sudo which can both be used to authenticate specific executables as able to run as root without needing a password.
Bypassing the IOMMU groups (ACS override patch)
If you find your PCI devices grouped among others that you do not wish to pass through, you may be able to seperate them using Alex Williamson's ACS override patch. Make sure you understand the potential risk of doing so.
You will need a kernel with the patch applied. The easiest method to acquiring this is through the linux-zen or linux-vfioAUR package.
In addition, the ACS override patch needs to be enabled with kernel command line options. The patch file adds the following documentation:
pcie_acs_override =
[PCIE] Override missing PCIe ACS support for:
downstream
All downstream ports - full ACS capabilties
multifunction
All multifunction devices - multifunction ACS subset
id:nnnn:nnnn
Specfic device - full ACS capabilities
Specified as vid:did (vendor/device ID) in hex
The option pcie_acs_override=downstream,multifunction should break up as many devices as possible.
After installation and configuration, reconfigure your bootloader kernel parameters to load the new kernel with the pcie_acs_override= option enabled.
Plain QEMU without libvirt
Instead of setting up a virtual machine with the help of libvirt, plain QEMU commands with custom parameters can be used for running the virtual machine intended to be used with PCI passthrough. This is desirable for some use cases like scripted setups, where the flexibility for usage with other scripts is needed.
To achieve this after #Setting up IOMMU and #Isolating the GPU, follow the QEMU article to setup the virtualized environment, enable KVM on it and use the flag -device vfio-pci,host=07:00.0 replacing the identifier (07:00.0) with your actual device's ID that you used for the GPU isolation earlier.
For utilizing the OVMF firmware, make sure the edk2-ovmf package is installed, copy the UEFI variables from /usr/share/edk2-ovmf/x64/OVMF_VARS.fd to temporary location like /tmp/MY_VARS.fd and finally specify the OVMF paths by appending the following parameters to the QEMU command (order matters):
-
-drive if=pflash,format=raw,readonly=on,file=/usr/share/edk2-ovmf/x64/OVMF_CODE.fdfor the actual OVMF firmware binary, note the readonly option -
-drive if=pflash,format=raw,file=/tmp/MY_VARS.fdfor the variables
- Make sure that
OVMF_CODE.fdis given as a command line parameter beforeMY_VARS.fd. The boot sequence will fail otherwise. - QEMU's default SeaBIOS can be used instead of OVMF, but it is not recommended as it can cause issues with passthrough setups.
It is recommended to study the QEMU article for ways to enhance the performance by using the virtio drivers and other further configurations for the setup.
You also might have to use the -cpu host,kvm=off parameter to forward the host's CPU model info to the virtual machine and fool the virtualization detection used by Nvidia's and possibly other manufacturers' device drivers trying to block the full hardware usage inside a virtualized system.
Passing through other devices
USB controller
If your motherboard has multiple USB controllers mapped to multiple groups, it is possible to pass those instead of USB devices. Passing an actual controller over an individual USB device provides the following advantages :
- If a device disconnects or changes ID over the course of an given operation (such as a phone undergoing an update), the virtual machine will not suddenly stop seeing it.
- Any USB port managed by this controller is directly handled by the virtual machine and can have its devices unplugged, replugged and changed without having to notify the hypervisor.
- Libvirt will not complain if one of the USB devices you usually pass to the guest is missing when starting the virtual machine.
Unlike with GPUs, drivers for most USB controllers do not require any specific configuration to work on a virtual machine and control can normally be passed back and forth between the host and guest systems with no side effects.
You can find out which USB devices correspond to which controller and how various ports and devices are assigned to each one of them using this command:
$ for usb_ctrl in /sys/bus/pci/devices/*/usb*; do pci_path=${usb_ctrl%/*}; iommu_group=$(readlink $pci_path/iommu_group); echo "Bus $(cat $usb_ctrl/busnum) --> ${pci_path##*/} (IOMMU group ${iommu_group##*/})"; lsusb -s ${usb_ctrl#*/usb}:; echo; done
Bus 1 --> 0000:00:1a.0 (IOMMU group 4) Bus 001 Device 004: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) Bus 001 Device 007: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 008: ID 0781:5530 SanDisk Corp. Cruzer Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 2 --> 0000:00:1d.0 (IOMMU group 9) Bus 002 Device 006: ID 0451:e012 Texas Instruments, Inc. TI-Nspire Calculator Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
This laptop has 3 USB ports managed by 2 USB controllers, each with their own IOMMU group. In this example, Bus 001 manages a single USB port (with a SanDisk USB pendrive plugged into it so it appears on the list), but also a number of internal devices, such as the internal webcam and the bluetooth card. Bus 002, on the other hand, does not apprear to manage anything except for the calculator that is plugged into it. The third port is empty, which is why it does not show up on the list, but is actually managed by Bus 002.
Once you have identified which controller manages which ports by plugging various devices into them and decided which one you want to passthrough, simply add it to the list of PCI host devices controlled by the virtual machine in your guest configuration. No other configuration should be needed.
Passing audio from virtual machine to host via PulseAudio
It is possible to route the virtual machine's audio to the host as an application using libvirt. This has the advantage of multiple audio streams being routable to one host output, and working with audio output devices that do not support passthrough. PulseAudio is required for this to work.
First, remove the comment from the #user = "" line. Then add your username in the quotations. This tells QEMU which user's pulseaudio stream to route through.
/etc/libvirt/qemu.conf
user = "example"
An emulated audio setup consists of two components: An emulated sound device exposed to the guest and an audio backend connecting the sound device to the host's PulseAudio.
Of the emulated sound devices available, two are of main interest: ICH9 and usb-audio. ICH9 features both output and input but is limited to stereo. usb-audio only features audio output but supports up to 6 channels in 5.1 configuration. For ICH9 remove any pre-existing audio backend in the <devices> section and add:
$ virsh edit vmname
<sound model='ich9'>
<codec type='micro'/>
<audio id='1'/>
</sound>
<audio id='1' type='pulseaudio' serverName='/run/user/1000/pulse/native'/>
Note the matching id elements. The example above assumes a single-user system with user ID 1000. Use the id command to find the correct ID. You can also use the /tmp directory if you have multiple users accessing PulseAudio:
$ virsh edit vmname
<audio id='1' type='pulseaudio' serverName='unix:/tmp/pulse-socket'/>
If you get crackling or distorted sound, try experimenting with some latency settings. The following example uses 20000 microseconds:
$ virsh edit vmname
<audio id="1" type="pulseaudio" serverName="/run/user/1000/pulse/native">
<input latency="20000"/>
<output latency="20000"/>
</audio>
You can also try disabling the software mixer included in QEMU. This should, in theory, be more efficient and allow for lower latencies since mixing will then take place on your host only:
$ virsh edit vmname
<audio id="1" type="pulseaudio" serverName="/run/user/1000/pulse/native">
<input mixingEngine="no"/>
<output mixingEngine="no"/>
</audio>
For usb-audio, the corresponding elements read
$ virsh edit vmname
<sound model='usb'>
<audio id='1'/>
</sound>
<audio id='1' type='pulseaudio' serverName='/run/user/1000/pulse/native'/>
However, if a 5.1 configuration is required the sound device needs to be configured via QEMU command line arguments:
$ virsh edit vmname
</devices>
<qemu:commandline>
<qemu:arg value='-device'/>
<qemu:arg value='usb-audio,id=sound0,audiodev=audio1,multi=on'/>
</qemu:commandline>
</domain>
The audiodev tag has to be set to match the audio backend's id element. id='1' corresponds to audio1 and so on.
- You can have multiple audio backends, by simply specifying
<audio>/-audiodevmultiple times in your XML and by assigning them different ids. This can be useful for a use case of having two identical backends. With PulseAudio each backend is a separate stream and can be routed to different output devices on the host (using a pulse mixer like pavucontrol or pulsemixer). - USB 3 emulation is needed in Libvirt/QEMU to enable the usb-audio.
- It is recommended to enable MSI interrupts with a tool such as [6] on the ICH9 audio device to mitigate any crackling, stuttering, speedup, or no audio at all after virtual machine restart.
- If audio is crackling/stuttering/speedup etc. is still present you may want to adjust parameters such as
buffer-lengthandtimer-period, more information on these parameters and more can be found in the qemu(1) manual. - Some audio chipsets such as Realtek alc1220 may also have issues out of the box so do consider this when using any audio emulation with QEMU.
- Improper pinning or heavy host usage without using isolcpus can also influence sound bugs, especially while gaming in a virtual machine.
Passing audio from virtual machine to host via JACK and PipeWire
It is also possible to pass the virtual machine's audio to the host via JACK and PipeWire.
First, make sure you have a working PipeWire setup with JACK support.
Next, you will need to tell libvirt to run QEMU as your user:
/etc/libvirt/qemu.conf
user = "example"
As a final preparation, the XML scheme has to be extended to allow passing of environment variables. For this, modify the virtual machine domain configuration
$ virsh edit vmname
<domain type='kvm'>
to
$ virsh edit vmname
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
Then, you can add the actual audio config to your virtual machine:
$ virsh edit vmname
<devices>
...
<audio id="1" type="jack">
<input clientName="vm-win10" connectPorts="your-input"/>
<output clientName="vm-win10" connectPorts="your-output"/>
</audio>
</devices>
<qemu:commandline>
<qemu:env name="PIPEWIRE_RUNTIME_DIR" value="/run/user/1000"/>
<qemu:env name="PIPEWIRE_LATENCY" value="512/48000"/>
</qemu:commandline>
</domain>
Note the matching id elements. Above's example assumes a single-user system with user ID 1000. Use the id command to find the correct ID.
You might have to play with the PIPEWIRE_LATENCY values to get to the desired latency without crackling.
Passing audio from virtual machine to host via Scream
It is possible to pass the virtual machine's audio through a bridged network such as the one provided by Libvirt or by adding a IVSHMEM device to the host by using a application called Scream. This section will only cover using PulseAudio as a receiver on the host. See the project page for more details and instructions on other methods.
Using Scream with a bridged network
- This is the preferred way to use this, although results may vary per user
- It is recommend to use the #Virtio network adapter while using Scream, other virtual adapters provided by QEMU such as e1000e may lead to poor performance
To use scream via your network you will want to find your bridge name via ip a, in most cases it will be called br0 or virbr0. Below is a example of the command needed to start the Scream application:
$ scream -o pulse -i virbr0 &
Adding the IVSHMEM device to use Scream with IVSHMEM
With the virtual machine turned off, edit the machine configuration
$ virsh edit vmname
...
<devices>
...
<shmem name='scream-ivshmem'>
<model type='ivshmem-plain'/>
<size unit='M'>2</size>
</shmem>
</devices>
...
In the above configuration, the size of the IVSHMEM device is 2MB (the recommended amount). Change this as needed.
Now refer to #Adding IVSHMEM Device to virtual machines to configure the host to create the shared memory file on boot, replacing looking-glass with scream-ivshmem.
Configuring the Windows guest for IVSHMEM
The correct driver must be installed for the IVSHMEM device on the guest.
See #Installing the IVSHMEM Host to Windows guest. Ignore the part about looking-glass-host.
Install the Scream virtual audio driver on the guest. If you have secure boot enabled for your virtual machine, you may need to disable it.
Using the registry editor, set the DWORD HKLM\SYSTEM\CurrentControlSet\Services\Scream\Options\UseIVSHMEM to the size of the IVSHMEM device in MB.
Note that scream identifies its IVSHMEM device using its size, so make sure there is only one device of that size (the suggested default is 2 for 2MB).
Use the following command in an admin CMD shell to create both key and DWORD: REG ADD HKLM\SYSTEM\CurrentControlSet\Services\Scream\Options /v UseIVSHMEM /t REG_DWORD /d 2 (sourced from scream on Github)
Configuring the host
Install screamAUR.
Create a systemd user service to control the receiver:
~/.config/systemd/user/scream-ivshmem-pulse.service
[Unit] Description=Scream IVSHMEM pulse receiver After=pulseaudio.service Wants=pulseaudio.service [Service] Type=simple ExecStartPre=/usr/bin/truncate -s 0 /dev/shm/scream-ivshmem ExecStartPre=/usr/bin/dd if=/dev/zero of=/dev/shm/scream-ivshmem bs=1M count=2 ExecStart=/usr/bin/scream -m /dev/shm/scream-ivshmem [Install] WantedBy=default.target
Edit count=2 with the size of the IVSHMEM device in MiB.
Now start the scream-ivshmem-pulse.service user unit.
To have it automatically start on next login, enable the user unit.
Physical disk/partition
Raw and qcow2 especially can have noticeable overhead for heavy IO. A whole disk or a partition may be used directly to bypass the filesystem and improve I/O performance. If you wish to dual boot the guest OS natively you would need to pass the entire disk without any partitioning. It is suggested to use /dev/disk/by- paths to refer to the disk since /dev/sdX entries can change between boots. To find out which disk/partition is associated with the one you would like to pass:
$ ls -l /dev/disk/by-id/*
/dev/disk/by-id/ata-ST1000LM002-9VQ14L_Z0501SZ9 -> ../../sdd
See #Virtio disk on how to add these with libvirt XML. You can also add the disk with Virt-Manager's Add Hardware menu and then type the disk you want in the Select or create custom storage box, e.g. /dev/disk/by-id/ata-ST1000LM002-9VQ14L_Z0501SZ9
Gotchas
Passing through a device that does not support resetting
When the virtual machine shuts down, all devices used by the guest are deinitialized by its OS in preparation for shutdown. In this state, those devices are no longer functional and must then be power-cycled before they can resume normal operation. Linux can handle this power-cycling on its own, but when a device has no known reset methods, it remains in this disabled state and becomes unavailable. Since Libvirt and Qemu both expect all host PCI devices to be ready to reattach to the host before completely stopping the virtual machine, when encountering a device that will not reset, they will hang in a "Shutting down" state where they will not be able to be restarted until the host system has been rebooted. It is therefore recommended to only pass through PCI devices which the kernel is able to reset, as evidenced by the presence of a reset file in the PCI device sysfs node, such as /sys/bus/pci/devices/0000:00:1a.0/reset.
The following bash command shows which devices can and cannot be reset.
for iommu_group in $(find /sys/kernel/iommu_groups/ -maxdepth 1 -mindepth 1 -type d);do echo "IOMMU group $(basename "$iommu_group")"; for device in $(\ls -1 "$iommu_group"/devices/); do if [[ -e "$iommu_group"/devices/"$device"/reset ]]; then echo -n "[RESET]"; fi; echo -n $'\t';lspci -nns "$device"; done; done
IOMMU group 0 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] (rev 09) IOMMU group 1 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 720] [10de:1288] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller [10de:0e0f] (rev a1) IOMMU group 2 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) IOMMU group 4 [RESET] 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) IOMMU group 5 [RESET] 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) IOMMU group 10 [RESET] 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) IOMMU group 13 06:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM204 [GeForce GTX 970] [10de:13c2] (rev a1) 06:00.1 Audio device [0403]: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1)
This signals that the xHCI USB controller in 00:14.0 cannot be reset and will therefore stop the virtual machine from shutting down properly, while the integrated sound card in 00:1b.0 and the other two controllers in 00:1a.0 and 00:1d.0 do not share this problem and can be passed without issue.
Complete setups and examples
For many reasons users may seek to see complete passthrough setup examples.
These examples offer a supplement to existing hardware compatibility lists. Additionally, if you have trouble configuring a certain mechanism in your setup, you might find these examples very valuable. Users there have described their setups in detail, and some have provided examples of their configuration files as well.
We encourage those who successfully build their system from this resource to help improve it by contributing their builds. Due to the many different hardware manufacturers involved, the seemingly significant lack of sufficient documentation, as well as other issues due to the nature of this process, community contributions are necessary.
Troubleshooting
If your issue is not mentioned below, you may want to browse QEMU#Troubleshooting.
QEMU 4.0: Unable to load graphics drivers/BSOD/Graphics stutter after driver install using Q35
Starting with QEMU 4.0, the Q35 machine type changes the default kernel_irqchip from off to split which breaks some guest devices, such as nVidia graphics (the driver fails to load / black screen / code 43 / graphics stutters, usually when mouse moving). Switch to full KVM mode instead by adding <ioapic driver='kvm'/> under libvirt's <features> tag in your virtual machine configuration or by adding kernel_irqchip=on in the -machine QEMU arg.
QEMU 5.0: host-passthrough with kernel version 5.5 to 5.8.1 when using Zen 2 processors: Windows 10 BSOD loop 'KERNEL SECURITY CHECK FAILURE'
Starting with QEMU 5.0 virtual machines running on Zen 2 and newer kernels than 5.4 will cause a BSOD loop of: 'KERNEL SECURITY CHECK FAILURE'. This can be fixed by either updating to kernel version 5.8.2 or higher, or disabling STIBP:
<cpu mode='host-passthrough' ...> ... <feature policy='disable' name='amd-stibp'/> ... </cpu>
This requires libvirt 6.5 or higher. On older versions, several workarounds exist:
- Switch CPU mode from
host-passthroughtohost-model. This only works on libvirt 6.4 or lower. - Manually patch qemu-desktop in order to revert this commit.
- On qemu commandline, add
amd-stibp=offto the cpu flags string. This can also be invoked through libvirt via a<qemu:commandline>entry.
"Error 43: Driver failed to load" with mobile (Optimus/max-q) nvidia GPUs
This error occurs because the Nvidia driver wants to check the status of the power supply. If no battery is present, the driver does not work. Whether Libvirt or Quemu, by default none of them provide the possibility to simulate a battery. This might also result in a reduced screen resolution and the Nvidia Desktop Manager refusing to load when right-clicking the desktop, saying it requires Windows 10, a compatible GPU and the Nvidia graphics driver.
You can however create and add a custom acpi table file to the virtual machine which will do the work.
First you have to create the custom acpi table file by pasting the following base64 string here and save the result file as SSDT1.dat:
U1NEVKEAAAAB9EJPQ0hTAEJYUENTU0RUAQAAAElOVEwYEBkgoA8AFVwuX1NCX1BDSTAGABBMBi5f U0JfUENJMFuCTwVCQVQwCF9ISUQMQdAMCghfVUlEABQJX1NUQQCkCh8UK19CSUYApBIjDQELcBcL cBcBC9A5C1gCCywBCjwKPA0ADQANTElPTgANABQSX0JTVACkEgoEAAALcBcL0Dk=
Next you must add the processed file to the main domain of the virtual machine:
<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0" type="kvm">
...
<qemu:commandline>
<qemu:arg value="-acpitable"/>
<qemu:arg value="file=/path/to/your/SSDT1.dat"/>
</qemu:commandline>
</domain>
Make sure your XML file has the correct namespace in the <domain> tag as visible above, otherwise the XML verification will fail.
"BAR 3: cannot reserve [mem]" error in dmesg after starting virtual machine
With respect to this article:
If you still have code 43 check dmesg for memory reservation errors after starting up your virtual machine, if you have similar it could be the case:
vfio-pci 0000:09:00.0: BAR 3: cannot reserve [mem 0xf0000000-0xf1ffffff 64bit pref]
Find out a PCI Bridge your graphic card is connected to. This will give actual hierarchy of devices:
$ lspci -t
Before starting the virtual machine run the following lines, replacing IDs with actual values from previous output.
# echo 1 > /sys/bus/pci/devices/0000\:00\:03.1/remove # echo 1 > /sys/bus/pci/rescan
In addition try adding kernel parameter pci=realloc which also helps with hotplugging issues.
UEFI (OVMF) compatibility in VBIOS
With respect to this article:
Error 43 can be caused by the GPU's VBIOS without UEFI support. To check whenever your VBIOS supports it, you will have to use rom-parser:
$ git clone https://github.com/awilliam/rom-parser $ cd rom-parser && make
Dump the GPU VBIOS:
# echo 1 > /sys/bus/pci/devices/0000:01:00.0/rom # cat /sys/bus/pci/devices/0000:01:00.0/rom > /tmp/image.rom # echo 0 > /sys/bus/pci/devices/0000:01:00.0/rom
And test it for compatibility:
$ ./rom-parser /tmp/image.rom
Valid ROM signature found @600h, PCIR offset 190h PCIR: type 0 (x86 PC-AT), vendor: 10de, device: 1184, class: 030000 PCIR: revision 0, vendor revision: 1 Valid ROM signature found @fa00h, PCIR offset 1ch PCIR: type 3 (EFI), vendor: 10de, device: 1184, class: 030000 PCIR: revision 3, vendor revision: 0 EFI: Signature Valid, Subsystem: Boot, Machine: X64 Last image
To be UEFI compatible, you need a "type 3 (EFI)" in the result. If it is not there, try updating your GPU VBIOS. GPU manufacturers often share VBIOS upgrades on their support pages. A large database of known compatible and working VBIOSes (along with their UEFI compatibility status!) is available on TechPowerUp.
Updated VBIOS can be used in the virtual machine without flashing. To load it in QEMU:
-device vfio-pci,host=07:00.0,......,romfile=/path/to/your/gpu/bios.bin \
And in libvirt:
<hostdev>
...
<rom file='/path/to/your/gpu/bios.bin'/>
...
</hostdev>
One should compare VBIOS versions between host and guest systems using nvflash (Linux versions under Show more versions) or GPU-Z (in Windows guest). To check the currently loaded VBIOS:
$ ./nvflash --version
... Version : 80.04.XX.00.97 ... UEFI Support : No UEFI Version : N/A UEFI Variant Id : N/A ( Unknown ) UEFI Signer(s) : Unsigned ...
And to check a given VBIOS file:
$ ./nvflash --version NV299MH.rom
... Version : 80.04.XX.00.95 ... UEFI Support : Yes UEFI Version : 0x10022 (Jul 2 2013 @ 16377903 ) UEFI Variant Id : 0x0000000000000004 ( GK1xx ) UEFI Signer(s) : Microsoft Corporation UEFI CA 2011 ...
If the external ROM did not work as it should in the guest, you will have to flash the newer VBIOS image to the GPU. In some cases it is possible to create your own VBIOS image with UEFI support using GOPUpd tool, however this is risky and may result in GPU brick.
In order to avoid the irreparable damage to your graphics adapter it is necessary to unload the NVIDIA kernel driver first:
# modprobe -r nvidia_modeset nvidia
Flashing the VBIOS can be done with:
# ./nvflash romfile.bin
Slowed down audio pumped through HDMI on the video card
For some users, the virtual machine's audio slows down/starts stuttering/becomes demonic after a while when it is pumped through HDMI on the video card. This usually also slows down graphics. A possible solution consists of enabling MSI (Message Signaled-Based Interrupts) instead of the default (Line-Based Interrupts).
In order to check whether MSI is supported or enabled, run the following command as root:
# lspci -vs $device | grep 'MSI:'
where `$device` is the card's address (e.g. `01:00.0`).
The output should be similar to:
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
A - after Enable means MSI is supported, but not used by the virtual machine, while a + says that the virtual machine is using it.
The procedure to enable it is quite complex, instructions and an overview of the setting can be found here.
On a linux guest you can use modinfo to see if there is option to enable MSI (for example: "modinfo snd_hda_intel |grep msi"). If there is, one can enable it by adding the relevant option to a custom omdprobe file - in "/etc/modprobe.d/snd-hda-intel.conf" inserting "options snd-hda-intel enable_msi=1"
Other hints can be found on the lime-technology's wiki, or on this article on VFIO tips and tricks.
A UI tool called MSI Utility (FOSS Version 2) works with Windows 10 64-bit and simplifies the process.
In order to fix the issues enabling MSI on the 0 function of a nVidia card (01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1) (prog-if 00 [VGA controller])) was not enough; it will also be required to enable it on the other function (01:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1)) to fix the issue.
No HDMI audio output on host when intel_iommu is enabled
If after enabling intel_iommu the HDMI output device of Intel GPU becomes unusable on the host then setting the option igfx_off (i.e. intel_iommu=on,igfx_off) might bring the audio back, please read intel-iommu.html for details about setting igfx_off.
X does not start after enabling vfio_pci
This is related to the host GPU being detected as a secondary GPU, which causes X to fail/crash when it tries to load a driver for the guest GPU. To circumvent this, a Xorg configuration file specifying the BusID for the host GPU is required. The correct BusID can be acquired from lspci -n or the Xorg log [7]. Note that the value from the lspci output is hexadecimal and should be converted to decimal in the .conf file.
/etc/X11/xorg.conf.d/10-intel.conf
Section "Device"
Identifier "Intel GPU"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection
Chromium ignores integrated graphics for acceleration
Chromium and friends will try to detect as many GPUs as they can in the system and pick which one is preferred (usually discrete NVIDIA/AMD graphics). It tries to pick a GPU by looking at PCI devices, not OpenGL renderers available in the system - the result is that Chromium may ignore the integrated GPU available for rendering and try to use the dedicated GPU bound to the vfio-pci driver, and unusable on the host system, regardless of whenever a guest virtual machine is running or not. This results in software rendering being used (leading to higher CPU load, which may also result in choppy video playback, scrolling and general un-smoothness).
This can be fixed by explicitly telling Chromium which GPU you want to use.
Virtual machine only uses one core
For some users, even if IOMMU is enabled and the core count is set to more than 1, the virtual machine still only uses one CPU core and thread. To solve this enable "Manually set CPU topology" in virt-manager and set it to the desirable amount of CPU sockets, cores and threads. Keep in mind that "Threads" refers to the thread count per CPU, not the total count.
Passthrough seems to work but no output is displayed
Make sure if you are using virt-manager that UEFI firmware is selected for your virtual machine. Also, make sure you have passed the correct device to the virtual machine.
Host lockup after virtual machine shutdown
This issue seems to primarily affect users running a Windows 10 guest and usually after the virtual machine has been run for a prolonged period of time: the host will experience multiple CPU core lockups (see [8]). To fix this try enabling Message Signal Interrupts on the GPU passed through to the guest. A good guide for how to do this can be found in [9]. You can also download this application for windows here [10] that should make the process easier.
Host lockup if guest is left running during sleep
VFIO-enabled virtual machines tend to become unstable if left running through a sleep/wakeup cycle and have been known to cause the host machine to lockup when an attempt is then made to shut them down. In order to avoid this, one can simply prevent the host from going into sleep while the guest is running using the following libvirt hook script and systemd unit. The hook file needs executable permissions to work.
/etc/libvirt/hooks/qemu
#!/bin/sh
OBJECT="$1"
OPERATION="$2"
SUBOPERATION="$3"
EXTRA_ARG="$4"
case "$OPERATION" in
"prepare")
systemctl start libvirt-nosleep@"$OBJECT"
;;
"release")
systemctl stop libvirt-nosleep@"$OBJECT"
;;
esac
/etc/systemd/system/[email protected]
[Unit] Description=Preventing sleep while libvirt domain "%i" is running [Service] Type=simple ExecStart=/usr/bin/systemd-inhibit --what=sleep --why="Libvirt domain \"%i\" is running" --who=%U --mode=block sleep infinity
Cannot boot after upgrading ovmf
If you cannot boot after upgrading from edk2-ovmf version 1:r23112.018432f0ce-1 then you need to remove the old *VARS.fd file in /var/lib/libvirt/qemu/nvram/:
# mv /var/lib/libvirt/qemu/nvram/vmname_VARS.fd /var/lib/libvirt/qemu/nvram/vmname_VARS.fd.old
See FS#57825 for further details.
Bluescreen at boot since Windows 10 1803
Since Windows 10 1803 there is a problem when you are using "host-passthrough" as cpu model. The machine cannot boot and is either boot looping or you get a bluescreen. You can workaround this by:
# echo 1 > /sys/module/kvm/parameters/ignore_msrs
To make it permanently you can create a modprobe file kvm.conf:
options kvm ignore_msrs=1
To prevent clogging up dmesg with "ignored rdmsr" messages you can additionally add:
options kvm report_ignored_msrs=0
AMD Ryzen / BIOS updates (AGESA) yields "Error: internal error: Unknown PCI header type ‘127’"
AMD users have been experiencing breakage of their KVM setups after updating the BIOS on their motherboard. There is a kernel patch, (see Kernel/Arch Build System for instruction on compiling kernels with custom patches) that can resolve the issue as of now (7/28/19), but this is not the first time AMD has made an error of this very nature, so take this into account if you are considering updating your BIOS in the future as a VFIO user.
AMD GPU not resetting properly yielding "Error: internal error: Unknown PCI header type ‘127’" (Separate issue from the one above)
Passing through an AMD GPU may result into a problem known as the "AMD reset bug". Upon power cycling the guest, the GPU does not properly reset its state which causes the device to malfunction until the host is also rebooted. This is usually paired with a "code 43" driver error in a Windows guest, and the message "Error: internal error: Unknown PCI header type '127'" in the libvirt log on the host.
In the past, this meant having to use work-arounds to manually reset the GPU, or resorting to the use of kernel patches that were unlikely to land in upstream. Currently, the recommended solution that does not require patching of the kernel is to install vendor-reset-gitAUR or vendor-reset-dkms-gitAUR and making sure the 'vendor-reset' kernel module is loaded before booting the guest. For convenience, you can load the module automatically.
Host crashes when hotplugging Nvidia card with USB
If attempting to hotplug an Nvidia card with a USB port, you may have to blacklist the i2c_nvidia_gpu driver. Do this by adding the line blacklist i2c_nvidia_gpu to /etc/modprobe.d/blacklist.conf.
Host unable to boot and stuck in black screen after enabling vfio
If debug kernel messages during boot are enabled by adding with the debug ignore_loglevel kernel parameters, you may see boot stuck with the last message similar to:
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
This can be mitigated by disconnecting the passed-through GPU from your monitor. You may reconnect the passed-through GPU to a monitor after the host has booted.
If you do not want to plug the cable in each time you boot the host. You can disable the framebuffer in your boot loader to bypass this message. For UEFI systems you can add video=efifb:off as a kernel parameter. For legacy support, use video=vesafb:off instead or in conjunction. Note that doing this may cause issues with Xorg.
If you encounter problems with Xorg, the following solution may help (remember to substitute with your own values if needed).
/etc/X11/xorg.conf.d/10-amd.conf
Section "Device"
Identifier "AMD GPU"
Driver "amdgpu"
BusID "PCI:0:2:0"
EndSection
AER errors when passing through PCIe USB hub
In some cases passing through a PCIe USB hub, such as one connected to the guest GPU, might fail with AER errors similar to the following:
kernel: pcieport 0000:00:01.1: AER: Uncorrected (Non-Fatal) error received: 0000:00:01.1 kernel: pcieport 0000:00:01.1: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) kernel: pcieport 0000:00:01.1: AER: device [8086:1905] error status/mask=00100000/00000000 kernel: pcieport 0000:00:01.1: AER: [20] UnsupReq (First) kernel: pcieport 0000:00:01.1: AER: TLP Header: 00000000 00000000 00000000 00000000 kernel: pcieport 0000:00:01.1: AER: device recovery successful
Reserved Memory Region Reporting (RMRR) Conflict
If you run into an issue passing through a device because of the BIOS's usage of RMRR, like the error below.
vfio-pci 0000:01:00.1: Device is ineligible for IOMMU domain attach due to platform RMRR requirement. Contact your platform vendor.
You can try the patches here: https://github.com/kiler129/relax-intel-rmrr
Too-low frequency limit for AMD GPU passed-through to virtual machine
On some machines with AMD GPUs, binding the devices to vfio-pci may be insufficient to prevent interference from the host, since the amdgpu driver on the host may query global ATIF methods which can alter the behavior of the GPU. For example, a user with a Dell Precision 7540 laptop containing a Radon Pro WX 3200 AMD GPU reported that, with the AMD GPU bound to vfio-pci, the passed-through AMD GPU was limited to 501 MHz instead of the correct 1295 MHz limit. Blacklisting the amdgpu kernel module using the kernel command line was a workaround.
See this kernel mailing list discussion for further details.