Profile-sync-daemon

From ArchWiki

Related articles

profile-sync-daemon (psd) is a tiny pseudo-daemon designed to manage browser profile(s) in tmpfs and to periodically sync back to the physical disc (HDD/SSD). This is accomplished by an innovative use of rsync to maintain synchronization between a tmpfs copy and media-bound backup of the browser profile(s). Additionally, psd features several crash recovery features.

The design goals and benefits of psd are:

  1. Transparent user experience
  2. Reduced wear to physical drives
  3. Speed

Since the profile(s), browser cache, etc. are relocated into tmpfs (RAM disk), the corresponding I/O associated with using the browser is also redirected from the physical drive to RAM, thus reducing wear to the physical drive and also greatly improving browser speed and responsiveness.

Note:
  • Some browsers such as Chrome/Chromium, Firefox (since v21) and Midori actually keep their cache directories separately from their profile directory. It is not within the scope of profile-sync-daemon to modify this behavior; users are encouraged to refer to the Chromium tweaks#Cache in tmpfs section for Chromium and to the Firefox on RAM article for several workarounds.
  • Occasionally, updates/changes are made to the default configuration file /usr/share/psd/psd.conf upstream. The user copy $XDG_CONFIG_HOME/psd/psd.conf will need to be diffed against it. On Arch Linux, pacman should notify the user to do this.
  • psd can slow down login, as that is when it copies your browser cache to RAM.

Installation

Install the profile-sync-daemon package.

Configuration

When first run, psd will create $XDG_CONFIG_HOME/psd/psd.conf (referred to hereafter as the configuration file) which contains all settings.

Note: Any edits made to this file while psd is active will be applied only after psd.service has been restarted.
$ psd
First time running psd so please edit /home/facade/.config/psd/psd.conf to your liking and run again.
  • Optionally enable the use of overlayfs to improve sync speed and to use a smaller memory footprint. Do this in the USE_OVERLAYFS variable. The user will require sudo rights to /usr/bin/psd-overlay-helper to use this option and the kernel must support overlayfs version 22 or higher. See #Overlayfs mode for additional details.
  • Optionally define which browsers are to be managed in the BROWSERS array. If none are defined, the default is all detected browsers.
  • Optionally disable the use of crash-recovery snapshots (not recommended). Do this in the USE_BACKUPS variable.
  • Optionally define the number of crash-recovery snapshots to keep. Do this in the BACKUP_LIMIT variable.

Example: Let us say that Chromium, Opera and Midori are installed but only Chromium and Opera are to be sync'ed to tmpfs since the user keeps Midori as a backup browser and it is seldom used: 

# List browsers separated by spaces to include in the sync. Useful if you do not
# wish to have all possible browser profiles sync'ed which is the default if
# this variable is left commented.
#
# Possible values:
#  chromium
#  chromium-dev
#  conkeror.mozdev.org
#  epiphany
#  firefox
#  firefox-trunk
#  google-chrome
#  google-chrome-beta
#  google-chrome-unstable
#  heftig-aurora
#  icecat
#  inox
#  luakit
#  midori
#  opera
#  opera-beta
#  opera-developer
#  opera-legacy
#  otter-browser
#  qupzilla
#  qutebrowser
#  palemoon
#  rekonq
#  seamonkey
#  surf
#  vivaldi
#  vivaldi-snapshot
#
BROWSERS=(chromium opera)

Beginning with version 5.54 of psd, native support for overlayfs is included. This feature requires at least a Linux kernel version of 3.18.0 or greater.

Supported browsers

Currently, the following browsers are auto-detected and managed:

Using psd

Start and stop psd

With the release of the version 6.x series of psd, the only init system that is officially supported is systemd. Psd ships with a systemd user service to start or stop it (psd.service). Additionally, a provided resync-timer will run an hourly resync from tmpfs back to the disk. The resync-timer is started automatically with psd.service so there is no need to manually start the timer.

For users unfamiliar with systemd user mode, see Systemd/User.

Preview (parse) mode

The 'parse' option can be called to show users exactly what psd will do/is doing based on $XDG_CONFIG_HOME/psd/psd.conf as well printout useful information such as profile size, paths, and if any recovery snapshots have been created. 

$ psd p
Profile-sync-daemon v6.44

 Systemd service: active
 resync-timer: active
 sync on sleep: enabled
 use overlayfs: enabled

Psd will manage the following per /home/facade/.config/psd/psd.conf settings:

 browser/psname:  chromium/chromium
 owner/group id:  facade/100
 sync target:     /home/facade/.config/chromium
 tmpfs dir:       /run/user/1000/facade-chromium
 profile size:    93M
 overlayfs size:  39M
 recovery dirs:   2 <- delete with the c option
  dir path/size:  /home/facade/.config/chromium-backup-crashrecovery-20150117_171359 (92M)
  dir path/size:  /home/facade/.config/chromium-backup-crashrecovery-20150119_112204 (93M)

 browser/psname:  firefox/firefox
 owner/group id:  facade/100
 sync target:     /mnt/data/docs/facade/mozilla/firefox/f8cv8bfu.default
 tmpfs dir:       /run/user/1000/facade-firefox-f8cv8bfu.default
 profile size:    145M
 overlayfs size:  13M
 recovery dirs:   none

As shown in the output and as stated above, if no specific browser or subset of browsers are defined in the BROWSERS array, psd will sync ALL supported profiles that it finds for the given user(s).

Tip and Tricks

Sync at more frequent intervals (optional)

The package provided re-sync timer triggers once per hour. Users may optionally redefine this behavior simply by extending the systemd unit. The example below changes the timer to sync once every ten minutes: 

~/.config/systemd/user/psd-resync.timer.d/frequency.conf
[Unit]
Description=Timer for Profile-sync-daemon

[Timer]
OnUnitActiveSec=
OnUnitActiveSec=10m

See systemd.timer(5) for additional options.

Overlayfs mode

Note: There are several versions of overlayfs available to the Linux kernel in production in various distributions. Versions 22 and lower have a module called 'overlayfs' while newer versions (23 and higher) have a module called 'overlay' -- note the lack of the 'fs' in the newer version. Psd will automatically detect the overlayfs available to your kernel if it is configured to use one of them.

Overlayfs is a simple union file-system mainlined in the Linux kernel version 3.18.0. Starting with psd version 5.54, overlayfs can be used to reduce the memory footprint of psd's tmpfs space and to speed up sync and unsync operations. The magic is in how the overlay mount only writes out data that has changed rather than the entire profile. The same recovery features psd uses in its default mode are also active when running in overlayfs mode. Overlayfs mode is enabled by uncommenting the USE_OVERLAYFS="yes" line in $XDG_CONFIG_HOME/psd/psd.conf followed by a restart of the daemon.

Since version 6.05 of psd, users wanting to take advantage of this mode MUST have sudo rights (without password prompt) to /usr/bin/psd-overlay-helper or global sudo rights. The following line in /etc/sudoers will supply a user with these rights (replace "user" with your actual username). Add it using visudo: 

user ALL=(ALL) NOPASSWD: /usr/bin/psd-overlay-helper

See the example in the PREVIEW MODE section above which shows a system using overlayfs to illustrate the memory savings that can be achieved. Note the "overlayfs size" report compared to the total "profile size" report for each profile. Be aware that these numbers will change depending on how much data is written to the profile, but in common use cases the overlayfs size will always be less than the profile size.

Warning: Usage of psd in overlayfs mode (in particular, psd-overlay-helper) may lead to privilege escalation. [1]

The way overlayfs works is to mount a read-only base copy (browser-back-ovfs) of the profile, and manage the new data on top of that. In order to avoid resyncing to the read-only file system, a copy is used instead. So using overlayfs is a trade off: faster initial sync times and less memory usage vs. disk space in the home dir.

Allocate more memory to accommodate profiles in /run/user/xxxx

The standard way of controlling the size of /run/user is the RuntimeDirectorySize directive in /etc/systemd/logind.conf (see logind.conf(5) for more). By default, 10% of physical memory is used but one can increase it safely. Remember that tmpfs only consumes what is actually used; the number specified here is just a maximum allowed.

Snapshots

Odds are the "last good" backup of your browser profiles is just fine still sitting happily on your filesystem. Upon restarting psd (on a reboot for example), a check is performed to see if the symlink to the tmpfs copy of your profile is invalid. If it is invalid, psd will snapshot the "last good" backup before it rotates it back into place. This is more for a sanity check that psd did no harm and that any data loss was a function of something else.

Note: Users can disable the snapshot/backup feature entirely by uncommenting and setting the USE_BACKUPS variable to 'no' in $XDG_CONFIG_HOME/psd/psd.conf if desired.

You will find the snapshot in the same directory as the browser profile and it will contain a date-time-stamp that corresponds to the time at which the recovery took place. For example, chromium will be ~/.config/chromium-backup-crashrecovery-20130912_153310 -- of course, the date_time suffix will be different for you.

To restore your snapshots:

  • Stop psd.service.
  • Confirm that there is no symlink to the tmpfs browser profile directory. If there is, psd did not stop correctly for other reasons.
  • Move the "bad" copy of the profile to a backup (do not blindly delete anything).
  • Copy the snapshot directory to the name that browser expects.

Example using Chromium: 

mv ~/.config/chromium ~/.config/chromium-bad
cp -a ~/.config/chromium-backup-crashrecovery-20130912_153310 ~/.config/chromium

At this point you can launch chromium which will use the backup snapshot you just copied into place. If all is well, close the browser and restart psd. You may safely delete ~/.config/chromium-backup-crashrecovery-20130912_153310 at this point.

Clean all the snapshot with the clean mode

The clean mode will delete ALL recovery snapshots that have accumulated. Run this only if you are sure that you want to delete them. 

$ psd c

Profile-sync-daemon v6.03 on Arch Linux.

Deleting 2 crashrecovery dirs for profile /home/facade/.config/chromium
 /home/facade/.config/chromium-backup-crashrecovery-20150117_171359
 /home/facade/.config/chromium-backup-crashrecovery-20150119_112204

Support

Post in the discussion thread with comments or concerns.

See also