Unbound
Unbound is a validating, recursive, and caching DNS resolver. According to Wikipedia:
- Unbound has supplanted the Berkeley Internet Name Domain (BIND) as the default, base-system name server in several open source projects, where it is perceived as smaller, more modern, and more secure for most applications.
Installation
Additionally, the expat package is required for #DNSSEC validation.
Configuration
A default configuration is already included at /etc/unbound/unbound.conf. The following sections highlight different settings for the configuration file. See unbound.conf(5) for other settings and more details.
Unless otherwise specified, any options listed in this section are to be placed under the server section in the configuration like so:
/etc/unbound/unbound.conf
server: ... setting: value ...
Local DNS server
If you want to use unbound as your local DNS server, set your nameserver to the loopback addresses ::1 and 127.0.0.1 in /etc/resolv.conf:
/etc/resolv.conf
nameserver ::1 nameserver 127.0.0.1 options trust-ad
Make sure to protect /etc/resolv.conf from modification as described in Domain name resolution#Overwriting of /etc/resolv.conf.
/etc/resolvconf.conf:
/etc/resolvconf.conf
name_servers="::1 127.0.0.1" resolv_conf_options="trust-ad"
Then run resolvconf -u to generate /etc/resolv.conf.
See Domain name resolution#Lookup utilities on how to test your settings.
Check specifically that the server being used is ::1 or 127.0.0.1 after making permanent changes to resolv.conf.
You can now setup unbound such that it is #Forwarding queries, perhaps all queries, to the DNS servers of your choice.
Root hints
For recursively querying a host that is not cached as an address, the resolver needs to start at the top of the server tree and query the root servers, to know where to go for the top level domain for the address being queried. Unbound comes with default builtin hints. Therefore, if the package is updated regularly, no manual intervention is required. Otherwise, it is good practice to use a root-hints file since the builtin hints may become outdated.
First point unbound to the root.hints file:
root-hints: root.hints
Then, put a root hints file into the unbound configuration directory. The simplest way to do this is to run the command:
# curl --output /etc/unbound/root.hints https://www.internic.net/domain/named.cache
When actually using this file, and not the builtin hints, it is a good idea to update root.hints every six months or so in order to make sure the list of root servers is up to date. This can be done manually or by using Systemd/Timers. See #Roothints systemd timer for an example.
DNSSEC validation
To use DNSSEC validation, the following setting for the server trust anchor should be under server::
/etc/unbound/unbound.conf
trust-anchor-file: trusted-key.key
This setting is done by default[1]. /etc/unbound/trusted-key.key is copied from /etc/trusted-key.key, which is provided by the dnssec-anchors dependency, whose PKGBUILD generates the file with unbound-anchor(8).
DNSSEC validation will only be done if the DNS server being queried supports it. If general #Forwarding queries have been set to DNS servers that do not support DNSSEC, their answers, whatever they are, should be considered insecure since no DNSSEC validation could be preformed.
Testing validation
To test if DNSSEC is working, after starting unbound.service, do:
$ unbound-host -C /etc/unbound/unbound.conf -v sigok.verteiltesysteme.net
The response should be the ip address with the word (secure) next to it.
$ unbound-host -C /etc/unbound/unbound.conf -v sigfail.verteiltesysteme.net
Here the response should include (BOGUS (security failure)).
Additionally you can use drill to test the resolver as follows:
$ drill sigfail.verteiltesysteme.net $ drill sigok.verteiltesysteme.net
The first command should give an rcode of SERVFAIL. The second should give an rcode of NOERROR.
Forwarding queries
If you only want to forward queries to an external DNS server, skip ahead to #Forward all remaining requests.
Allow local network to use DNS
Using openresolv
If your network manager supports openresolv, you can configure it to provide local DNS servers and search domains to Unbound:
/etc/resolvconf.conf
... private_interfaces="*" # Write out unbound configuration file unbound_conf=/etc/unbound/resolvconf.conf
Run resolvconf -u to generate the file.
Configure Unbound to read the openresolv's generated file and allow replies with private IP address ranges[2]:
/etc/unbound/unbound.conf
include: "/etc/unbound/resolvconf.conf" ... server: ... private-domain: "intranet" private-domain: "internal" private-domain: "private" private-domain: "corp" private-domain: "home" private-domain: "lan" unblock-lan-zones: yes insecure-lan-zones: yes ...
Additionally you may want to disable DNSSEC validation for private DNS namespaces (see RFC 6762 Appendix G):
/etc/unbound/unbound.conf
... server: ... domain-insecure: "intranet" domain-insecure: "internal" domain-insecure: "private" domain-insecure: "corp" domain-insecure: "home" domain-insecure: "lan" ...
Exclude local subnets from answers
Will be useful to exclude local networks from DNS answers because it would protect against DNS rebinding attacks. By default this feature is not active but you can add any subnet you want in configuration file:
private-address: local_subnet/subnet_mask
You can add all private and link-local subnets by this strings:
private-address: 10.0.0.0/8 private-address: 172.16.0.0/12 private-address: 192.168.0.0/16 private-address: 169.254.0.0/16 private-address: fd00::/8 private-address: fe80::/10
Note that Unbound may have adresses from excluded subnets in answers if they belong to domains from private-domain or specifed by local-data, so you need to define private-domain how described at #Using openresolv to able query local domains adresses.
Include local DNS server
To include a local DNS server for both forward and reverse local addresses a set of lines similar to these below is necessary with a forward and reverse lookup (choose the IP address of the server providing DNS for the local network accordingly by changing 10.0.0.1 in the lines below):
local-zone: "10.in-addr.arpa." transparent
This line above is important to get the reverse lookup to work correctly.
forward-zone: name: "mynetwork.com." forward-addr: 10.0.0.1
forward-zone: name: "10.in-addr.arpa." forward-addr: 10.0.0.1
You can set up the localhost forward and reverse lookups with the following lines:
local-zone: "localhost." static local-data: "localhost. 10800 IN NS localhost." local-data: "localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800" local-data: "localhost. 10800 IN A 127.0.0.1" local-zone: "127.in-addr.arpa." static local-data: "127.in-addr.arpa. 10800 IN NS localhost." local-data: "127.in-addr.arpa. 10800 IN SOA localhost. nobody.invalid. 2 3600 1200 604800 10800" local-data: "1.0.0.127.in-addr.arpa. 10800 IN PTR localhost."
Forward all remaining requests
Using openresolv
If your network manager supports openresolv, you can configure it to provide upstream DNS servers to Unbound.
/etc/resolvconf.conf
... # Write out unbound configuration file unbound_conf=/etc/unbound/resolvconf.conf
Run resolvconf -u to generate the file.
Finally configure Unbound to read the openresolv's generated file[3]:
include: "/etc/unbound/resolvconf.conf"
Manually specifying DNS servers
To use specific servers for default forward zones that are outside of the local machine and outside of the local network add a forward zone with the name . to the configuration file. In this example, all requests are forwarded to Google's DNS servers:
forward-zone: name: "." forward-addr: 8.8.8.8 forward-addr: 8.8.4.4
Forwarding using DNS over TLS
To use DNS over TLS, you will need to specify tls-cert-bundle option that points to the local system's root certificate authority bundle, allow unbound to forward TLS requests and also specify any number of servers that allow DNS over TLS.
For each server you will need to specify that the connection port using @, and you will also need to indicate which is its domain name with #. Even though it looks like an comment the hashtag name allows for the TLS authentication name to be set for stub-zones and with unbound-control forward control command. There should not be any spaces between the @ and # markups.
/etc/unbound/unbound.conf
...
server:
...
tls-cert-bundle: /etc/ssl/certs/ca-certificates.crt
...
forward-zone:
name: "."
forward-tls-upstream: yes
forward-addr: 1.1.1.1@853#cloudflare-dns.com
Access control
You can specify the interfaces to answer queries from by IP address. The default, is to listen on localhost.
To listen on all interfaces, use the following:
interface: 0.0.0.0
To control which systems can access the server by IP address, use the access-control option:
access-control: subnet action
For example:
access-control: 192.168.1.0/24 allow
action can be one of deny (drop message), refuse (polite error reply), allow (recursive ok), or allow_snoop (recursive and nonrecursive ok). By default everything is refused except for localhost.
Usage
Starting Unbound
Start/enable the unbound.service systemd service.
Remotely control Unbound
unbound ships with the unbound-control utility which enables us to remotely administer the unbound server. It is similar to the pdnsd-ctl command of pdnsd.
Setting up unbound-control
Before you can start using it, the following steps need to be performed:
1) Firstly, you need to run the following command
# unbound-control-setup
which will generate a self-signed certificate and private key for the server, as well as the client. These files will be created in the /etc/unbound directory.
2) After that, edit /etc/unbound/unbound.conf and put the following contents in that. The control-enable: yes option is necessary, the rest can be adjusted as required.
remote-control:
# Enable remote control with unbound-control(8) here.
# set up the keys and certificates with unbound-control-setup.
control-enable: yes
# what interfaces are listened to for remote control.
# give 0.0.0.0 and ::0 to listen to all interfaces.
control-interface: 127.0.0.1
# port number for remote control operations.
control-port: 8953
# unbound server key file.
server-key-file: "/etc/unbound/unbound_server.key"
# unbound server certificate file.
server-cert-file: "/etc/unbound/unbound_server.pem"
# unbound-control key file.
control-key-file: "/etc/unbound/unbound_control.key"
# unbound-control certificate file.
control-cert-file: "/etc/unbound/unbound_control.pem"
Using unbound-control
Some of the commands that can be used with unbound-control are:
- print statistics without resetting them
# unbound-control stats_noreset
- dump cache to stdout
# unbound-control dump_cache
- flush cache and reload configuration
# unbound-control reload
Please refer to unbound-control(8) for a detailed look at the operations it supports.
Tips and tricks
Domain blacklisting
To blacklist a domain, use local-zone: "domainname" always_refuse.
Save the blacklist as a separate file (e.g. /etc/unbound/blacklist.conf) for ease of management and include it from /etc/unbound/unbound.conf. For example:
/etc/unbound/blacklist.conf
local-zone: "blacklisted.example" always_refuse local-zone: "anotherblacklisted.example" always_refuse
/etc/unbound/unbound.conf
server: ... include: /etc/unbound/blacklist.conf
- In order to return some OK statuses on those hosts, you can change the 127.0.0.1 redirection to a server you control and have that server respond with empty 204 replies, see this page
- To convert a hosts file from another source to the unbound format do:
$ grep '^0\.0\.0\.0' hostsfile | awk '{print "local-zone: \""$2"\" always_refuse"}' > /etc/unbound/blacklist.conf - A list of potential sources for the blacklist can be found in OpenWrt's adblock package's README.
Adding an authoritative DNS server
For users who wish to run both a validating, recursive, caching DNS server as well as an authoritative DNS server on a single machine then it may be useful to refer to the wiki page NSD which gives an example of a configuration for such a system. Having one server for authoritative DNS queries and a separate DNS server for the validating, recursive, caching DNS functions gives increased security over a single DNS server providing all of these functions. Many users have used Bind as a single DNS server, and some help on migration from Bind to the combination of running NSD and Bind is provided in the NSD wiki page.
WAN facing DNS
It is also possible to change the configuration files and interfaces on which the server is listening so that DNS queries from machines outside of the local network can access specific machines within the LAN. This is useful for web and mail servers which are accessible from anywhere, and the same techniques can be employed as has been achieved using bind for many years, in combination with suitable port forwarding on firewall machines to forward incoming requests to the right machine.
Roothints systemd timer
Here is an example systemd service and timer that update root.hints monthly using the method in #Root hints:
/etc/systemd/system/roothints.service
[Unit] Description=Update root hints for unbound After=network.target [Service] ExecStart=/usr/bin/curl -o /etc/unbound/root.hints https://www.internic.net/domain/named.cache
/etc/systemd/system/roothints.timer
[Unit] Description=Run root.hints monthly [Timer] OnCalendar=monthly Persistent=true [Install] WantedBy=timers.target
Start/enable the roothints.timer systemd timer.
Troubleshooting
Issues concerning num-threads
The man page for unbound.conf mentions:
outgoing-range: <number>
Number of ports to open. This number of file descriptors can be opened per thread.
and some sources suggest that the num-threads parameter should be set to the number of cpu cores. The sample unbound.conf.example file merely has:
# number of threads to create. 1 disables threading.
# num-threads: 1
However it is not possible to arbitrarily increase num-threads above 1 without causing unbound to start with warnings in the logs about exceeding the number of file descriptors. In reality for most users running on small networks or on a single machine it should be unnecessary to seek performance enhancement by increasing num-threads above 1. If you do wish to do so then refer to official documentation and the following rule of thumb should work:
- Set
num-threadsequal to the number of CPU cores on the system. E.g. for 4 CPUs with 2 cores each, use 8.
Set the outgoing-range to as large a value as possible, see the sections in the referred web page above on how to overcome the limit of 1024 in total. This services more clients at a time. With 1 core, try 950. With 2 cores, try 450. With 4 cores try 200. The num-queries-per-thread is best set at half the number of the outgoing-range.
Because of the limit on outgoing-range thus also limits num-queries-per-thread, it is better to compile with libevent, so that there is no 1024 limit on outgoing-range. If you need to compile this way for a heavy duty DNS server then you will need to compile the programme from source instead of using the unbound package.